We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 38A10L14 TIGEAR-2 worm gear speed reducer with 10:1 ratio, 3-piece coupled input, left side solid output shaft (1.625" dia), 140TC motor flange, 3.8" center distance. Cast iron housing, 10 HP input capacity, 3,310 in-lb output torque. - Ratio: 10:1
- Center Distance: 3.8"
- Input: 140TC Flange
- Output Bore/Shaft Diameter: 1.625"
- Output: Left Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 10
- Output Horse Power: 9.19
MODEL 38A10L14
Contact supplier for technical support on: +1-864-284-5700
$3,295.86 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
3.8800 in, 98.552 mm
Case size
38
Center distance (in)
3.5000 in, 88.9 mm, Center distance (in):3.8 in
Center to end of shaft distance
7.7500 in, 196.85 mm
Gearbox component type
Gearbox
Horsepower rating input
10.0000 hp, 7.457 kW
Horsepower rating output
9.1900 hp, 6.853 kW
Housing material
Cast iron
Input
140TC flange
Input HP
10
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
8.5000 in, 215.9 mm
Mounting bolt pattern width
4.7500 in, 120.65 mm
Nominal ratio
10
Output
Left side solid output shaft
Output bore/shaft diameter
1.625 in
Output horse power
9.19
Output shaft center to input motor mounting face distance
10.2600 in, 260.604 mm
Output style
Left
Overhung load
2700 lbf, 12010.198 N
Paint type
Standard
Paint/coating
Green
Rated torque output
3310 in/lb, 3310.0 in/lb
Ratio
10 to 1
Seal type
Single-lip contact
Shaft diameter output
1.6250 in, 41.275 mm
Shaft length output
4.2000 in, 106.68 mm
Suitable for washdown
No
Thermal horsepower rating
10.6300 hp, 7.927 kW
- Gear Type: Worm gear, right-angle configuration
- Reduction Ratio: 10:1
- Input Style: 3-piece coupled for easy motor separation
- Output: Left side solid shaft, 1.625" diameter
- Motor Flange: 140TC C-face
- Center Distance: 3.8" (case size 38)
- Power Rating: 10 HP input capacity
- Output Torque: 3,310 in-lb
- Housing: Cast iron construction with green paint finish
- Weight: 122 lbs
- Applications: Belt conveyors, mixers, agitators, and general industrial drives requiring right-angle power transmission
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read more
| Brand | IKO Bearing |
| Model | SBB522RS |
| Brand | IKO Bearing |
| Model | GE90ES |
| Brand | IKO Bearing |
| Model | GE200ES |
| Brand | IKO Bearing |
| Model | SB100A |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/