We never sell your data to third parties
Dodge 38S15L TIGEAR-2 worm gear speed reducer with 15:1 ratio, 3.8" center distance, separate belt-driven input, left side solid output shaft, cast iron housing, 7.44 HP rating, 3599 in-lb output torque, ventless design with synthetic lubricant. - Ratio: 15:1
- Center Distance: 3.8"
- Input: 0.875" Input Shaft
- Output Bore/Shaft Diameter: 1.625"
- Output: Left Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 7.44
- Output Horse Power: 6.66
MODEL 38S15L
Contact supplier for technical support on: +1-864-284-5700
$2,854.53 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
3.8800 in, 98.552 mm
Case size
38
Center distance (in)
3.5000 in, 88.9 mm, Center distance (in):3.8 in
Center to end of shaft distance
7.7500 in, 196.85 mm
Gearbox component type
Gearbox
Horsepower rating input
7.4400 hp, 5.548 kW
Horsepower rating output
6.6600 hp, 4.966 kW
Housing material
Cast iron
Input
0.875 in Input Shaft
Input HP
7.44
Input style
Separate
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
8.5000 in, 215.9 mm
Mounting bolt pattern width
4.7500 in, 120.65 mm
Nominal ratio
15
Output
Left side solid output shaft
Output bore/shaft diameter
1.625 in
Output horse power
6.66
Output style
Left
Overhung load
2760 lbf, 12277.092 N
Paint type
Standard
Paint/coating
Green
Rated torque output
3599 in/lb, 3599.0 in/lb
Ratio
15 to 1
Seal type
Single-lip contact
Shaft dia input
0.8750 in
Shaft diameter output
1.6250 in, 41.275 mm
Shaft length input
1.8700 in, 47.498 mm
Shaft length output
4.2000 in, 106.68 mm
Suitable for washdown
No
Thermal horsepower rating
7.5600 hp, 5.637 kW
- Reducer Family: TIGEAR-2 worm gear speed reducer
- Gear Ratio: 15:1 reduction ratio
- Center Distance: 3.8" (case size 38)
- Input Type: Separate belt-driven input (no motor flange)
- Output: Left side solid output shaft, 1.625" diameter
- Power Rating: 7.44 HP input capacity
- Output Torque: 3,599 in-lb maximum
- Housing: Cast iron construction with green paint finish
- Lubrication: Factory-filled synthetic lubricant, ventless design
- Applications: Belt conveyors, mixers, agitators, general industrial drives requiring right-angle reduction
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read more
| Brand | Timken Belts |
| Model | RCX68-5 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-400348 |
| Brand | Gates Rubber |
| Model | 3/CX105 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/