We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 38A30L14 TIGEAR-2 worm gear speed reducer featuring 30:1 ratio, 3-piece coupled input, left side solid output shaft (1.6250" diameter), 140TC flange, 3.8" center distance. Cast iron housing, 4.15 HP rating, 3,682 in-lb output torque. Totally - Ratio: 30:1
- Center Distance: 3.8"
- Input: 140TC Flange
- Output Bore/Shaft Diameter: 1.625"
- Output: Left Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 4.15
- Output Horse Power: 3.41
MODEL 38A30L14
Contact supplier for technical support on: +1-864-284-5700
$3,295.86 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
3.8800 in, 98.552 mm
Case size
38
Center distance (in)
3.5000 in, 88.9 mm, Center distance (in):3.8 in
Center to end of shaft distance
7.7500 in, 196.85 mm
Gearbox component type
Gearbox
Horsepower rating input
4.1500 hp, 3.095 kW
Horsepower rating output
3.4100 hp, 2.543 kW
Housing material
Cast iron
Input
140TC flange
Input HP
4.15
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
8.5000 in, 215.9 mm
Mounting bolt pattern width
4.7500 in, 120.65 mm
Nominal ratio
30
Output
Left side solid output shaft
Output bore/shaft diameter
1.625 in
Output horse power
3.41
Output shaft center to input motor mounting face distance
10.2600 in, 260.604 mm
Output style
Left
Overhung load
2760 lbf, 12277.092 N
Paint type
Standard
Paint/coating
Green
Rated torque output
3682 in/lb, 3682.0 in/lb
Ratio
30 to 1
Seal type
Single-lip contact
Shaft diameter output
1.6250 in, 41.275 mm
Shaft length output
4.2000 in, 106.68 mm
Suitable for washdown
No
Thermal horsepower rating
4.4300 hp, 3.303 kW
- Gear Type: Worm gear right-angle reduction
- Ratio: 30:1 reduction ratio
- Input: 3-piece coupled input with 140TC flange
- Output: Left side solid shaft, 1.6250" diameter
- Center Distance: 3.8" for size 38 case
- Housing: Cast iron construction, green paint finish
- Capacity: 4.15 HP input, 3,682 in-lb output torque
- Design: Totally enclosed, ventless, maintenance-free with synthetic lubricant
- Applications: Material handling, conveyors, mixers, pumps requiring compact right-angle drive
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read more
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/