We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 38A30LR14 TIGEAR-2 worm gear speed reducer with 30:1 ratio, double solid output shaft, 3-piece coupled input, 140TC frame, 3.8" center distance. Cast iron housing with green paint finish. 4.15 HP input, 3682 in-lb output torque. - Ratio: 30:1
- Center Distance: 3.8"
- Input: 140TC Flange
- Output Bore/Shaft Diameter: 1.625"
- Output: Double Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 4.15
- Output Horse Power: 3.41
MODEL 38A30LR14
Contact supplier for technical support on: +1-864-284-5700
$3,684.02 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
3.8800 in, 98.552 mm
Case size
38
Center distance (in)
3.5000 in, 88.9 mm, Center distance (in):3.8 in
Center to end of shaft distance
7.7500 in, 196.85 mm
Gearbox component type
Gearbox
Horsepower rating input
4.1500 hp, 3.095 kW
Horsepower rating output
3.4100 hp, 2.543 kW
Housing material
Cast iron
Input
140TC flange
Input HP
4.15
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
8.5000 in, 215.9 mm
Mounting bolt pattern width
4.7500 in, 120.65 mm
Nominal ratio
30
Output
Double solid output shaft
Output bore/shaft diameter
1.625 in
Output horse power
3.41
Output shaft center to input motor mounting face distance
10.2600 in, 260.604 mm
Output style
Left, right
Overhung load
2760 lbf, 12277.092 N
Paint type
Standard
Paint/coating
Green
Rated torque output
3682 in/lb, 3682.0 in/lb
Ratio
30 to 1
Seal type
Single-lip contact
Shaft diameter output
1.6250 in, 41.275 mm
Shaft length output
4.2000 in, 106.68 mm
Suitable for washdown
No
Thermal horsepower rating
4.4300 hp, 3.303 kW
- Ratio: 30:1 reduction
- Gear Type: Worm gear, right-angle drive
- Output Configuration: Double solid output shaft (left and right), 1.6250" diameter
- Input Type: 3-piece coupled input for easy motor separation
- Frame Mount: 140TC NEMA C-face flange
- Center Distance: 3.8" case size 38
- Power Rating: 4.15 HP input capacity
- Output Torque: 3,682 in-lb
- Housing: Cast iron construction with green paint finish
- Weight: 122 lbs
- Applications: Belt conveyors, mixers, agitators, material handling equipment requiring right-angle drives
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read more
| Brand | Gates Rubber |
| Model | 2/8V3550 |
| Brand | TB Woods |
| Model | 4R8V1060 |
| Brand | FAG Bearing |
| Model | 6200-C-C3 |
| Brand | Jason Industrial |
| Model | 6/8V2120 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/