We never sell your data to third parties
Dodge 38A40R56 TIGEAR-2 worm gear speed reducer with 40:1 ratio, right side solid output shaft, 1.625" output bore, 56C flange input, 3.8" center distance, cast iron housing, green paint. 3.23 input HP, 2.51 output HP. 3-piece coupled input design for easy motor separation. Suitable for Class I and II applications with moderate shock loads.
MODEL 38A40R56
Contact supplier for technical support on: +1-864-284-5700
$3,295.86 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
3.8800 in, 98.552 mm
Case size
38
Center Distance
3.8" (case size 38)
Center distance (in)
3.5000 in, 88.9 mm, Center distance (in):3.8 in
Center to end of shaft distance
7.7500 in, 196.85 mm
Gear Type
Worm gear right-angle reducer
Gearbox component type
Gearbox
Horsepower rating input
3.2300 hp, 2.409 kW
Horsepower rating output
2.5100 hp, 1.872 kW
Housing
Cast iron
Housing material
Cast iron
Input
56C flange
Input HP
3.23
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
8.5000 in, 215.9 mm
Mounting bolt pattern width
4.7500 in, 120.65 mm
Nominal ratio
40
Output
Right side solid shaft, 1.625" diameter
Output bore/shaft diameter
1.625 in
Output horse power
2.51
Output shaft center to input motor mounting face distance
10.2600 in, 260.604 mm
Output style
Right
Overhung load
2760 lbf, 12277.092 N
Paint type
Standard
Paint/coating
Green
Power Rating
3.23 HP input
Rated torque output
3622 in/lb, 3622.0 in/lb
Ratio
40:1 reduction
Seal type
Single-lip contact
Shaft diameter output
1.6250 in, 41.275 mm
Shaft length output
4.2000 in, 106.68 mm
Suitable for washdown
No
Thermal horsepower rating
3.5400 hp, 2.64 kW
Torque Rating
3622 in-lb output torque
Specifications
- Catalog Number: 38A40R56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 40:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.625"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 3.8"
- Case Size: 38
- Housing Material: Cast Iron
- Paint: Green
- Weight: 122.0000 lb
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
| Brand | Gates Rubber |
| Model | P144-20M-230 |
| Brand | Dichtomatik |
| Model | 67002690 |
| Brand | Cutler Hammer |
| Model | 13103AQD03 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-726032 |
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/