We never sell your data to third parties
Dodge 35AZ07H14WP TIGEAR-2 E-Z Kleen worm gear speed reducer with 7:1 ratio, 3-piece coupled input, hollow bore output, 140TC flange, and 3.5" center distance. Cast iron housing with white epoxy washdown finish. Rated 12.24 HP input, 11.46 HP output, 1.9375" output bore diameter. Ideal for food, beverage, and washdown applications requiring corrosion resistance.
MODEL 35AZ07H14WP
Contact supplier for technical support on: +1-864-284-5700
$4,820.57 Each
Prices are subject to change
THIS ORDER SHIPS FREE
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.9900 in, 101.346 mm
Bore dia output
1.9380 in, 49.225 mm
Bore length
8.7400 in, 221.996 mm
Case size
35
Center distance (in)
3.5 in, Center distance (in):3.5000 in, 88.9 mm
Finish
White epoxy
Gearbox component type
Gearbox
Horsepower rating input
12.2400 hp, 9.127 kW
Horsepower rating output
11.4600 hp, 8.546 kW
Housing
Cast iron construction with 3.5" center distance
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
12.24
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
7.5000 in, 190.5 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
7
Output
Hollow bore 1.9375" diameter
Output bore/shaft diameter
1.9375 in
Output horse power
11.46
Output shaft center to input motor mounting face distance
10.2600 in, 260.604 mm
Output style
Hollow
Overhung load
2430 lbf, 10809.179 N
Paint type
White epoxy
Paint/coating
White
Performance
12.24 HP input rating, 3054 in-lb output torque capacity
Rated torque output
3054 in/lb, 3054.0 in/lb
Ratio
7 to 1
Seal type
Two-piece harsh duty
Suitable for washdown
Yes
Thermal horsepower rating
12.5200 hp, 9.336 kW
Specifications
- Catalog Number: 35AZ07H14WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 7:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.9375"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 3.5"
- Case Size: 35
- Housing Material: Cast Iron
- Paint: White
- Weight: 115.0000 lb
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/