We never sell your data to third parties
Gates 8MGT-2400-62 Poly Chain GT Carbon Belts
MODEL 8MGT-2400-62
Contact supplier for technical support on: 303-744-5800
$511.92 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Returnable:No
#172651
Brand
Gates Rubber
Model
8MX-45S-62
#1865171
Brand
FYH Bearing
Model
UCPA207 35MMNP
#1865311
Brand
FYH Bearing
Model
UCPH206 30MMLIII
#1899858
Brand
SKF Seals
Model
25074
Belt Back Side
Ribbed
Belt Height (in)
0.23
Color
Blue
End
Endless
Fabric Material
Nylon
Height (in)
0.135
Length (mm)
2400
Material
Polyurethane
Minimum Pulley Diameter
95.17 mm
Number of Teeth
300
Pitch (in)
0.315
Pitch length (in)
94.49
Reinforced Material
Carbon
Section
8M
Series
9274
Sided
Single Sided
Sprocket Comptab
Poly Chain GT
Standard Width
YES
Static Conductive
No
Temperature Range
-65 to 185 deg F
Tooth Height (in)
0.14
Tooth Profile
Curvilinear
Width (in)
2.441
- Durable polyurethane construction resists chemicals, oil, pollutants, and abrasion.
- Fully operational in temperature extremes of -54°C to +85°C (-65°F to +185°F).
Application advantages you can count on.
Our Poly Chain GT Carbon belt drives have immediate impact on your application, with proven success stories, performance and savings metrics from operations all over the world.
energy savings over V-belts
5%higher power ratings than previous constructions
30%efficiency for life of the drive
99%greater capacity than HTD belts
400%Features and Benefits
- Our patented, curvilinear tooth profile provides high shear strength, noise reduction, and improved load-carrying capacity.
- Equivalent capacity to roller chain drives in the same width.
- Easy, rust-free wash-down with Gates Stainless Steel hardware.
- Fast drive conversion payback. Quieter than roller chain drives.
- Lubrication, re-tensioning and maintenance free.
No questions match your search.
How do I read a Gates 8MGT Poly Chain GT Carbon part number, and which sizes are standard? This product
The part number gives pitch, pitch length in mm and width in mm, so 8MGT-1200-62 is an 8mm pitch belt, 1200 mm long (150 teeth) and 62 mm wide. Gates lists standard 8mm lengths from 8MGT-640 (80 teeth) to 8MGT-4480 (560 teeth) in four widths: 12, 21, 36 and 62 mm. Matching sprockets use the 8MX code: 8MX-48S-12 is a 48 groove sprocket for a 12 mm belt. The smallest stock 8mm sprocket in Gates' tables has 22 grooves.
What are Gates 8mm short-length Poly Chain belts, such as 8MGT-416-36? This product
Gates makes 8mm Poly Chain GT Carbon belts below the standard 640 mm range, in 352, 416, 456, 480, 544 and 608 mm lengths (44 to 76 teeth) and 12, 21 and 36 mm widths. They use the same construction as standard Poly Chain GT Carbon belts but have a smooth back instead of the ribbed back, because of the way they are made. They run on standard Poly Chain GT2 sprockets and suit compact, high-torque drives such as roller-to-roller live roller conveyors. MROSupply lists them as 8M Short Length belts.
My old belt is a PowerGrip GT3 1120-8MGT-30. What replaces it? This product
Gates converted 8M and 14M stock PowerGrip GT3 belts to PowerGrip GT4 from around March 2020. The part number stays the same (1120-8MGT-30), but the Gates product number prefix changes from 9356 to 9579 with the same last four digits, so 9356-0038 becomes 9579-0038. Gates says GT3 and GT4 match in fit, form and function, with GT4 adding 10 to 30 percent capacity in most applications. Do not fit either one on Poly Chain 8MX sprockets: Poly Chain belts and sprockets are a separate system.
What is the Gates 8GTV belt and when do I need it? This product
8GTV is the 8mm Poly Chain Carbon Volt belt, the static conductive version of Poly Chain GT Carbon, for drives where a static discharge is a hazard, such as dusty or potentially explosive atmospheres. Gates states it meets ISO 9563 for static conductivity over the full life of the belt and runs on Poly Chain GT2 sprockets. Conductivity only helps if the whole drive is grounded (belt, sprocket, bushing, shaft and bearings), and Gates advises a static conductive brush as extra protection in hazardous areas. Part numbers follow the GT Carbon pattern, for example 8GTV-1440-62, in the same 12, 21, 36 and 62 mm widths.
What belt mass constant do I enter on a Gates sonic tension meter for an 8mm belt? This product
Gates lists adjusted mass constants in grams per meter per mm of belt width. For 8mm Poly Chain GT Carbon it is 4.7, for 8mm PowerGrip GT4 it is 4.85, and for the older 8mm PowerGrip GT3 it is 5.8. Enter the belt width in mm (21.0 for a 21 mm Poly Chain belt) and the span length in mm. Gates says Poly Chain GT Carbon has such high resistance to stretch that the drive does not need re-tensioning or take-up after installation, so getting the installation tension right matters.
Belt 5vx940
Verified · SKU 1248999Excellent Speedy Service. TLC Will continue doing business with MRO. Read more
Great price on gates belt
Verified · SKU 5932923Great price and fairly quick shipping. Read more
Office manager
Verified · SKU 2231058Works just like its suppose to. Read more
Office manager
Verified · SKU 2231058I got exactly what i ordered. Works like its suppose to.. Read more
#2986176
Brand
Timken Belts
Model
8MXT-2400-62
#2012767
Brand
Jason Industrial
Model
2400PLT8M62
#1245094
Brand
Gates Rubber
Model
5M1120
#2787430
Brand
PCI
Model
YCF-9.00-S
#2036272
Brand
United Abrasives
Model
35113
#152285
Brand
Dodge
Model
30AZ07R18
#145478
Brand
Dodge
Model
30AZ20R18
#2035479
Brand
United Abrasives
Model
20083
In order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.