We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
TB Woods P808M30 synchronous sprocket with 80 teeth, 8M pitch, and 30 mm belt width. SK bushing accepts bores from 1/2 to 2-1/2 inches. Cast-iron construction with two flanges, 7.97 inch outside diameter, and 3140 RPM upper limit. Designed for HTD synchronous belt drives.
MODEL P808M30
Contact supplier for technical support on: 888-829-6637
$305.52 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Belt width
30 mm
Bore type
Quick disconnect bushing
Bushing
SK
Bushing bore range
1/2 - 2 1/2
Dimension
1.88
Face width
1.5
Flanges
2
Groove profile
8M
Hub Diameter
4.38
Hub diameter
4.38
Hub length
1.25
Hub location
0.25
I.D.
6.9
Inertia WR2 (lbs ft2)
0.61
Inertia WR²
62
Inside hub projection
0
Material type
Cast iron
Number of grooves
80
Number of hubs
2
Number of teeth
80
O.D.
7.97
O.D. (in)
7.966
Outside hub projection
0
Pitch
8
Pitch diameter
8.02
Rim face
1.5
RPM upper limit
3140
Tooth pitch
8
Timing Belt Pulleys The TB Woods P808M30 Synchronous Sprocket is engineered for optimal performance in timing belt applications, specifically designed to accommodate the 8mm pitch. This high-quality sprocket is ideal for use in power transmission systems where precision and reliability are paramount.
Key Features
| Pitch Size | 8mm pitch, ensuring compatibility with various timing belts for seamless operation. |
|---|---|
| Material Construction | Crafted from high-strength materials for enhanced durability, reducing wear and extending service life. |
| Tooth Configuration | Features a precision tooth profile designed to minimize backlash and improve synchronous engagement. |
| Design Specification | The P808M30 has a compact design, allowing for efficient space utilization in tight installations. |
| High Load Capacity | Engineered to withstand significant loads and stresses, making it suitable for demanding industrial applications. |
Applications
| Industrial Automation | Perfect for conveyors, packaging machinery, and robotics where timing accuracy is critical. |
|---|---|
| Material Handling | Utilized in systems that require precise movement and synchronization of components. |
| Energy Sector | Suitable for applications in renewable energy systems and other energy-efficient machinery. |
Benefits
| Enhanced Performance | The precise tooth design and robust construction contribute to smoother operation and reduced noise levels. |
|---|---|
| Increased Reliability | Built to perform under challenging conditions, ensuring minimal downtime and maintenance. |
| Versatile Compatibility | Compatible with a range of belts and systems, making it a flexible choice for various applications. |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read more
| Brand | MRO Supply |
| Model | FS0319-12 |
| Brand | Bando |
| Model | 600-DS8M-600 |
| Brand | Consolidated Bearings |
| Model | 53214-U |
| Brand | Consolidated Bearings |
| Model | 6318 C/4 |
SKU: 832766
Didn’t use yet
I really didn’t use them yet but the belts I received were actually Carlisle belts which are made by Timken. I had ordered a belt that I knew was Carlisle at the same time to try out the difference brands and it was the same belt. The only difference was the TB Woods belt was $10 more per belt so you might as well just buy the Carlisle/ Timken directly.
Read moreSKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.