We never sell your data to third parties
Gates 90132038 BX38 Tri-Power Cogged V-Belt with BX section, 38" effective length, and cogged construction. Designed for industrial drives requiring higher horsepower and reduced sheave diameters. The cogged design provides increased flexibility and cooler operation compared to wrapped belts.
MODEL BX38
Gates Rubber
$16.63
In stock
Bando
$17.48
Jason Industrial
$19.31
Timken Belts
$22.96
In stock
Bestorq
$10.65
Browning
$20.08
MasterDrive
$15.77
Contact supplier for technical support on: 303-744-5800
$16.63 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Angle
40
Belt Back Side
Smooth
Belt Inside
Notched
Cogged
Yes
Color
Black
Construction
Bandless
Cord Material
Polyester
Depth
7/16 in
Depth (per rib)
7/16 in
Effective Length (in)
40.91
Length
38 in
Material
EPDM
Minimum Pulley Diameter
4.775 in
Number ribs
1
Outside circumference (in)
41
outside length
41 in
Reinforced Material
Flex-Bonded Polyester
Section
BX
Series
9013
Sided
Single Sided
Static Conductive
Yes
Temperature Range
-70 to 250 deg F
Thickness
13/32 in
Top width
21/32 in
Top Width (in)
0.66
Top width (per rib)
21/32 in
Type
Cogged Heavy Duty Molded Notch
Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.
- Belt edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear.
- Flex-bonded cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration. 15% capacity increase over wrapped belts.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required.
- Meets ARPM/RMA IP-3-2 oil and heat resistant standards and IP-3-3 static conductivity requirements.REACH and RoHS 2 compliant.
PERFECT BELTS FOR IMPERFECT CONDITIONS.
Over time, belts fail from heat cracks, stretching or excessive wear. Belt retensioning and replacement leads to downtime, inefficiency and loss of productivity. Only Gates molded notch V-belts, including our Tri-Power molded notch belt line, offer a patented, new ethylene construction to keep your operations running when other belts fail.
Features and Benefits
- Flex-Bonded tensile cords are strongly forged to the body of the belt, resulting in equal load distribution with absorption of bending stress and separation without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Tri-Power belts are available in AX, BX, and CX sizes.
EQUIPPED FOR YOUR OPERATING ENVIRONMENT.
Featuring a composite, multi-purpose construction, Gates heavy-duty Tri-Power Belts resist oil, heat, contaminants, tensile and flexing forces, fatigue, and shock loads. We've even engineered our proprietary EPDM belt material to combat self-igniting, meaning your belt won't catch fire from heat build-up, even with severe slippage.
In order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.