We never sell your data to third parties
Gates 3/3VX850 Super HC Molded Notch PowerBand V-belt with 3VX cogged narrow-wedge section, 85.0" outside length, and 3-band construction. Designed for high-horsepower industrial drives requiring vibration resistance and wedge stability. Molded notch design improves flexibility and heat dissipation on small-diameter sheaves.
MODEL 3/3VX850
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 303-744-5800
$106.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable:No
Angle
38
Belt Back Side
Smooth
Belt Inside
Notched
Cogged
Yes
Color
Black
Construction
Bandless
Cord Material
Polyester
Depth
21/64 in
Depth (per rib)
21/64 in
Effective Length (in)
84.81
Material
EPDM
Minimum Pulley Diameter
3.82 in
Number ribs
3
Outside circumference (in)
85
outside length
85 in
Reinforced Material
Flex-Bonded Polyester
Section
3VX
Series
9388
Sided
Single Sided
Static Conductive
No
Temperature Range
-60 to 250 deg F
Thickness (in)
0.35
Top width
3/8 in
Top Width (in)
1.19
Top width (per rib)
3/8 in
Type
Heavy Duty Molded Notch
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51°C to +121°C (-60°F to +250°F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
SKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 1245113
Great belts
Bought these for my lathe. They are much better made than the original. MROSupply charges a very competitive price and the packaging and shipping speed was great.
Read moreSKU: 1245032
Great parts
Found the belts I needed here at the best price available. very fast shipping, great service. will be doing business again. Thank you.
Read more
#2021872
Brand
Timken Belts
Model
R3VX850-3
#833337
Brand
TB Woods
Model
3R3VX850
#678475
Brand
Bando
Model
3-3VX850
#2021871
Brand
Timken Belts
Model
R3VX850-2
#2243494
Brand
Bestorq
Model
3/3VX850
#678432
Brand
Bando
Model
2-3VX850
#1985725
Brand
Jason Industrial
Model
2/3VX850
#833336
Brand
TB Woods
Model
2R3VX850
| Brand | Hubbell Wiring |
| Model | HBL3054 |
| Brand | Bestorq |
| Model | 960K10 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-536058 |
| Brand | Gates Rubber |
| Model | 3/11M1650JB |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-606225 |
| Brand | PIP |
| Model | 713SUCG/M |
SKU: 5932890
Gt4 cog belt
I've not had a chance to try it out but if it's at least as good as the 150 hours I had on the GT2 belt when I decided to replace it, I'll be a happy camper!
Read moreSKU: 1245113
Great belts
Bought these for my lathe. They are much better made than the original. MROSupply charges a very competitive price and the packaging and shipping speed was great.
Read moreSKU: 1245032
Great parts
Found the belts I needed here at the best price available. very fast shipping, great service. will be doing business again. Thank you.
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.