We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Gates 93895100 5/5VX1000 Super HC Molded Notch PowerBand Belts - Cross Section: 5VX
- Strands: 5
- Sectional Top Width: 5/8"
- Total Top Width: 3 1/8"
- Depth: 35/64"
- Outside Circumference: 100.00"
- Material ID: 93895100
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt" a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
MODEL 5/5VX1000
Contact supplier for technical support on: 303-744-5800
$442.96 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Angle
42
Belt Back Side
Smooth
Belt Inside
Notched
Cogged
Yes
Color
Black
Construction
Bandless
Cord Material
Polyester
Depth
35/64 in
Depth (per rib)
35/64 in
Effective Length (in)
99.81
Material
EPDM
Minimum Pulley Diameter
7.958 in
Number ribs
5
Outside circumference (in)
100
outside length
100 in
Reinforced Material
Flex-Bonded Polyester
Section
5VX
Series
9389
Sided
Single Sided
Static Conductive
No
Temperature Range
-60 to 250 deg F
Thickness (in)
0.55
Top width
5/8 in
Top Width (in)
3.38
Top width (per rib)
5/8 in
Type
Heavy Duty Molded Notch
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
- Patented Ethylene (EPDM) Material construction provides -51°C to +121°C (-60°F to +250°F) temperature range to resist belt cracking.
- The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive.
- Meets RMA oil and heat resistant standards and static conductivity requirements.
SKU: 179389
Gates b-55 belt
We use these belts on wastewater lagoon aerators which run 24/7. Great price for a high quality belt and receive them within a few days of ordering!
Read moreSKU: 183305
Great deal
Very good customer service, great prices and super fast shipping!!! Will buy again!!
Read moreSKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read moreSKU: 1248999
Belt 5vx940
Excellent Speedy Service. TLC Will continue doing business with MRO.
Read more
#2021901
Brand
Timken Belts
Model
R5VX1000-5
#834148
Brand
TB Woods
Model
5R5VX1000
#2243631
Brand
Bestorq
Model
5/5VX1000
#678564
Brand
Bando
Model
5-5VX1000
#1986190
Brand
Jason Industrial
Model
5/5VX1000
#2336910
Brand
MasterDrive
Model
5/5VX1000
| Brand | Dixon |
| Model | TM64 |
| Brand | Dichtomatik |
| Model | 75020805 |
| Brand | Rocky Mountain Twist |
| Model | 95000560 |
| Brand | Pramet |
| Model | 6788513 |
| Brand | Dichtomatik |
| Model | 75004028 |
| Brand | Allen Bradley |
| Model | 1606-XLE80E |
| Brand | Moline Bearing |
| Model | 29221300D |
SKU: 179389
Gates b-55 belt
We use these belts on wastewater lagoon aerators which run 24/7. Great price for a high quality belt and receive them within a few days of ordering!
Read moreSKU: 183305
Great deal
Very good customer service, great prices and super fast shipping!!! Will buy again!!
Read moreSKU: 2788490
Great service!
I needed a hydraulic pump belt and found it at MRO Supply. Great prices and fast shipping, will order again. Thank you very much!
Read moreSKU: 1248999
Belt 5vx940
Excellent Speedy Service. TLC Will continue doing business with MRO.
Read moreIn order to be eligible for a return, product to be returned must be at least $150 US. Items must be unused and unmounted, in resalable condition. Return authorization must be requested, no credit or exchanges will be granted if items are shipped back without return authorization or if items are not in resalable condition. Re-stocking fee is $60 US flat, cannot be voided if placing an off-setting order. Made To Order items are Non-Returnable and Non-Cancellable.