Red Lion Controls ZCG0012C ZC G 12PPR

Description

The ZCG is a rugged, incremental encoder that converts shaft rotation into a current sinking pulse train. Internally, a single L. E. D. light source and a photologic sensor in conjunction with a shaft-mounted, durable, metal-etched encoder disc, provides signal accuracy and reliability to 10 KHz. The DC input power supply requirement is a versatile +8 to +35 VDC, and is reverse polarity protected. The NPN Open Collector Transistor Output is current limited to 40 mA and is compatible with most RLC counters, rate indicators, controllers and accessories.

The ZCG is packaged in a rugged cast aluminum housing with a gasketed, rear aluminum cover. The 3/8' (9. 53 mm) diameter heavy duty stainless steel shaft and sealed, lifetime-lubricated precision ball bearings are preloaded for minimum end play and rated for continuous use up to 6000 RPM. The unit is designed to meet NEMA 13/IP54 environmental requirements. The ZCG is supplied with 10 feet (3M) of PVC jacketed 3-wire, 22 AWG cable with stranded shield wire and 100% foil shield coverage. Operating Temperature range is -18°C to +60°C.

The ZCG can be direct-coupled to a machine shaft by means of a flexible bellows, spring or rubber sleeve type coupler, etc., that allows for axial and radial misalignment. They can also be coupled with instrument timing belts and pulleys or gears. The housing may be rigidly face-mounted with the 4, #8-32 threaded holes. The 3-wire shielded cable exits through a cord connector.

For information on wheels and tires click here.

Specifications

• General Duty
• Current Sink Output
• 3 Wire, 10 Foot Cable
• 12 Pulses Per Revolution
• Max. Speed Capability 6000 RPM
• 0. 375" (9. 5 mm) Shaft Diameter

Accessories

Pages

• « first
• ‹ previous
• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• next ›
• last »