We never sell your data to third parties
Dodge 124578 FC-SC-101 flanged cartridge bearing with 1-1/16" bore, 65-degree set screw locking, normal duty cast iron housing, 206 series ball bearing insert, DualGuard seal, non-expansion design for fixed shaft positioning. 1-1/16" bore 4-Bolt Piloted Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL FC-SC-101
Contact supplier for technical support on: +1-864-284-5700
$130.85 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
206 series
Bearing type
Ball, ball
Bolt circle
3.6300 in, 92.202 mm
Bolt Diameter
0.3750 in
Bolt to bolt max
3.6300 in, 92.202 mm
Bolt to bolt min
3.6300 in, 92.202 mm
Bore
1 1/16 in
Bore length
1.5200 in, 38.608 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Pilot depth
0.2500 in, 6.35 mm
Pilot diameter
3.0000 in, 76.2 mm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.0625 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: FC Flanged Cartridge - Round piloted flange with bolt circle mounting
- Bore Diameter: 1-1/16 inch (26.987mm) exact
- Locking Method: 65-degree set screw for maximum holding power
- Housing Material: Cast iron Class 25/30 for general purpose applications
- Bearing Series: 206 series ball bearing insert
- Duty Rating: Normal duty for standard industrial loads
- Seal Protection: DualGuard single lip seal with rubberized flinger
- Configuration: Non-expansion (fixed) design for shaft positioning
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#125539
Brand
Dodge
Model
P2B-DL-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#118463
Brand
Dodge
Model
119590
#580822
Brand
Dodge
Model
108043
#130310
Brand
Dodge
Model
037590
| Brand | Champion |
| Model | 1705-K |
| Brand | Cleveland |
| Model | C44513 |
| Brand | Champion |
| Model | 1705-O |
| Brand | Modicon |
| Model | 170ADI34000 |
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/