We never sell your data to third parties
Dodge 123915 P2B-SCAH-215 two-bolt pillow block bearing with 2-15/16" bore, set screw locking, cast iron housing, normal duty rating, designed for air handling applications, 215 series ball bearing insert. 2-15/16" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in Air Handling applications
MODEL P2B-SCAH-215
Contact supplier for technical support on: +1-864-284-5700
$447.98 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
Air handling
Ball bearing series
215 series
Base to center height
3.5000 in, 88.9 mm
Bearing type
Ball, ball
Bolt Diameter
0.8750 in
Bolt to bolt max
2.3100 in, 58.674 mm
Bolt to bolt min
8.5000 in, 215.9 mm
Bore
2 15/16 in
Bore length
2.3300 in, 59.182 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 15/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
3000 rpm
Max Speed
1750 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
Single-lip seal with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
2.9375 in
Standoff housing
No
Static load capacity
11108 lbf, 49410.846 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-50,TS-350
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with cast iron construction
- Bore Diameter: 2-15/16" (74.612mm)
- Locking Type: 65° set screw for secure shaft attachment
- Duty Rating: Normal duty for standard industrial applications
- Bearing Series: 215 series ball bearing insert
- Application: Air handling (AH) variant for HVAC and air movement systems
- Mounting: Non-expansion (fixed) configuration
- Maximum Speed: 1,750 RPM
- Static Load Rating: 11,108 lbf
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#792254
Brand
Dodge
Model
TS-350X9-TUFR
#123399
Brand
Dodge
Model
P2B-SCAH-215
#130593
Brand
Dodge
Model
P2B-SCM-85M
#2247199
Brand
Dodge
Model
127333
#2247198
Brand
Dodge
Model
127332
#1153651
Brand
IPTCI Bearing
Model
UCPX 15 47 L3
| Brand | Bridgeport |
| Model | 441-SLTI |
| Brand | Remke |
| Model | 112B0200A |
| Brand | Orbit Industries |
| Model | OF609-W |
| Brand | Bridgeport |
| Model | 620-NM |
| Brand | Merrick |
| Model | M998070 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/