We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 124230 FC-SC-200 piloted flange mounted ball bearing with 2" bore, 65-degree set screw locking, cast iron housing, DualGuard seals, 210 series non-expansion design for fixed shaft positioning applications. 2" bore 4-Bolt Piloted Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL FC-SC-200
Contact supplier for technical support on: +1-864-284-5700
$197.25 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
210 series
Bearing type
Ball, ball
Bolt circle
5.1300 in, 130.302 mm
Bolt Diameter
0.5000 in
Bolt to bolt max
5.1300 in, 130.302 mm
Bolt to bolt min
5.1300 in, 130.302 mm
Bore
2 in
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Uncoated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
I.D.
2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
4500 rpm
Max Speed
3000 rpm
Pilot depth
0.4700 in, 11.938 mm
Pilot diameter
4.5000 in, 114.3 mm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
2.0000 in
Standoff housing
No
Static load capacity
5213 lbf, 23188.579 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: Piloted Flange (FC) - surface mount with machined pilot diameter
- Bore Diameter: 2" (50.8mm) with 210 series ring
- Locking Type: 65-degree set screw for maximum shaft grip
- Housing Material: Cast iron for general industrial applications
- Duty Rating: Standard duty for normal operating conditions
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Seal Protection: DualGuard seals with flingers for contamination protection
- Max Speed: 3,000 RPM operating capability
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2218137
Brand
Dodge
Model
P2B-DL-20M-HTS
#123364
Brand
Dodge
Model
P2B-SC-012-NL
#123466
Brand
Dodge
Model
FC-SC-200
#123535
Brand
Dodge
Model
P2B-SCAH-012
#125539
Brand
Dodge
Model
P2B-DL-012
#2259554
Brand
SealMaster
Model
700520
#11595
Brand
AMI Bearings
Model
UCFCS210-32
#2271960
Brand
Browning
Model
767160
| Brand | Cle-Line |
| Model | C20462 |
| Brand | Cle-Line |
| Model | C20579 |
| Brand | M.K. Morse |
| Model | ZWEP3218W |
| Brand | Isostatic |
| Model | FB-1012-8 |
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/