We never sell your data to third parties
Dodge 123728 P2B-SCU-215 two-bolt pillow block ball bearing with 2-15/16" bore, set screw locking, cast iron housing, standard duty, DualGuard seals, 215 series, 1750 RPM max speed for general industrial applications. 2-15/16" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SCU-215
Contact supplier for technical support on: +1-864-284-5700
$410.20 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
215 series
Base to center height
3.2500 in, 82.55 mm
Bearing type
Ball, ball
Bolt Diameter
0.8750 in
Bolt to bolt max
9.5000 in, 241.3 mm
Bolt to bolt min
8.5000 in, 215.9 mm
Bore
2 15/16 in
Bore length
2.3300 in, 59.182 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 15/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
3000 rpm
Max Speed
1750 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
2.9375 in
Standoff housing
No
Static load capacity
11108 lbf, 49410.846 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-50,TS-350
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block bearing
- Bore Diameter: 2-15/16" (74.612mm)
- Locking Type: Set screw (65° angle)
- Housing Material: Cast iron
- Duty Rating: Standard duty
- Bearing Series: 215 series
- Seal Type: DualGuard seals with flingers
- Max Speed: 1750 RPM
- Static Load: 11,108 lbf (49,411 N)
- Weight: 16.87 lbs
- Applications: General industrial machinery, conveyors, fans, and equipment requiring reliable shaft support
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#130593
Brand
Dodge
Model
P2B-SCM-85M
#2247199
Brand
Dodge
Model
127333
#792254
Brand
Dodge
Model
TS-350X9-TUFR
#2247198
Brand
Dodge
Model
127332
#123568
Brand
Dodge
Model
P2B-SCU-215
#498273
Brand
Link-Belt
Model
10411996
#326607
Brand
SKF Bearing
Model
SY 2.15/16 TF
#133679
Brand
Dodge
Model
P2B-SXRU-215
#269629
Brand
NTN Bearing
Model
UCP-2.15/16
#269063
Brand
NTN Bearing
Model
UELP-2.15/16
#5079775
Brand
Timken
Model
RAS2 15/16
| Brand | Dake |
| Model | 974355 |
| Brand | Wiegmann |
| Model | JWD6 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/