We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 126283 F4B-SCM-204 four-bolt flange mounted ball bearing with 2-1/4" bore, medium duty set screw locking, cast iron housing, 212 series, DualGuard seals, non-expansion design for heavy-duty industrial applications. 2-1/4" bore 4-Bolt Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL F4B-SCM-204
Contact supplier for technical support on: +1-864-284-5700
$231.59 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
212 series
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
5.6300 in, 143.002 mm
Bolt to bolt min
5.6300 in, 143.002 mm
Bore
2 1/4 in
Bore length
2.3100 in, 58.674 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
3 1/2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
3500 RPM
Max Speed
2000 RPM
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
2.2500 in
Standoff housing
No
Static load capacity
8100 lbf, 36030.595 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt flange mount for surface mounting applications
- Bore Diameter: 2-1/4" (57.15mm) with 212 series ball bearing insert
- Locking Type: 65-degree set screw for maximum shaft grip
- Duty Rating: Medium duty for higher loads than normal duty units
- Housing Material: Cast iron construction for durability
- Sealing: DualGuard seals with flingers for contamination protection
- Configuration: Non-expansion (fixed) design for shaft positioning
- Applications: Industrial machinery, conveyors, and equipment requiring surface-mounted bearing support
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
#125623
Brand
Dodge
Model
P2B-DLB-012
#126948
Brand
Dodge
Model
P2B-VSCB-012
#123602
Brand
Dodge
Model
F4B-SCM-204
#123363
Brand
Dodge
Model
P2B-SC-012
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/