We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 124479 TB-SC-108 tapped-base pillow block bearing with 1-1/2" bore, set screw locking, and cast iron housing. Standard duty 208 series ball bearing with DualGuard seals for general industrial applications. 1-1/2" bore Tap Based Ball Bearing with Set Screw locking used in General Purpose applications
MODEL TB-SC-108
Contact supplier for technical support on: +1-864-284-5700
$155.38 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
208 series
Base to center height
1.9400 in, 49.276 mm
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
3.5000 in, 88.9 mm
Bolt to bolt min
3.5000 in, 88.9 mm
Bore
1 1/2 in
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Tapped-base pillow block
I.D.
1 1/2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
5000 rpm
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.5000 in
Standoff housing
No
Static load capacity
4475 lbf, 19905.792 N
Suitable for high temperature
No
Suitable for washdown
No
Type
Tap based
- Housing Type: Tapped-base pillow block with threaded mounting holes
- Bore Diameter: 1-1/2 inch (38.1mm)
- Locking Type: Set screw with 65-degree angle for maximum holding power
- Housing Material: Cast iron for durability and heat dissipation
- Duty Rating: Standard duty for general industrial applications
- Bearing Series: 208 series ball bearing insert
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Sealing: DualGuard seals with flingers for contamination protection
- Applications: Ideal for conveyor drives, pumps, fans, and general machinery where threaded base mounting is required
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123311
Brand
Dodge
Model
F4B-SC-103
#125210
Brand
Dodge
Model
TB-SC-110L
#130862
Brand
Dodge
Model
TB-SC-115
#125198
Brand
Dodge
Model
TB-SC-100
#125537
Brand
Dodge
Model
P2B-DLAH-115
| Brand | Orbit Industries |
| Model | FA-5SDB-MKO |
| Brand | Cooper Wiring |
| Model | 63CR69 |
| Brand | Airmaster |
| Model | 31080 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/