We never sell your data to third parties
Dodge 131749 F2B-SXV-108 two-bolt flange bearing with 1-1/2" bore, eccentric collar locking, intermediate duty cast iron housing, ProGuard lip seal, 208 series for shaft mounting applications 1-1/2" bore 2-Bolt Flange Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL F2B-SXV-108
Contact supplier for technical support on: +1-864-284-5700
$84.60 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
208 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bore
1 1/2 in
Bore length
1.7200 in, 43.688 mm
Duty
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt flange
I.D.
1 1/2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Max RPM
5000 rpm
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
1.5000 in
Standoff housing
No
Static load capacity
4475 lbf, 19905.792 N
Suitable for high temperature
No
Suitable for washdown
No
Type
2-bolt flange
- Housing Type: Two-bolt flange (F2B) for surface mounting applications
- Bore Diameter: 1-1/2" (38.1mm) shaft size
- Locking Type: Eccentric collar (SXV) for secure shaft attachment
- Duty Rating: Intermediate duty for moderate load applications
- Housing Material: Cast iron construction for durability
- Seal Type: ProGuard lip seal for contamination protection
- Series: 208 bearing series for optimal load capacity
- Max Speed: 3,500 RPM operating limit
- Weight: 3.98 lbs for installation planning
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123535
Brand
Dodge
Model
P2B-SCAH-012
#125227
Brand
Dodge
Model
F2B-SXV-108
#5785450
Brand
Dodge
Model
P2B-SC-20M-HT
#123363
Brand
Dodge
Model
P2B-SC-012
#6423543
Brand
Dodge
Model
056744
#2271731
Brand
Browning
Model
767661
#16339
Brand
AMI Bearings
Model
KHFT208-24
#491917
Brand
Link-Belt
Model
10406113
#274782
Brand
NTN Bearing
Model
JELFLU-1.1/2
| Brand | Cutler Hammer |
| Model | E57LBL30A2E |
| Brand | Balax |
| Model | 54005-01C |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/