We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 131991 P2B-SXVB-104 two-bolt pillow block bearing with 1-1/4" bore and eccentric collar locking. Intermediate duty cast iron housing, 207 series ball bearing, DualGuard seals with flingers, non-expansion (fixed) configuration. 1-1/4" bore Pillow Block 2-Bolt Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL P2B-SXVB-104
Contact supplier for technical support on: +1-864-284-5700
$77.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
207 series
Base to center height
1.8100 in, 45.974 mm
Bearing type
Ball, ball
Bolt centerline range
4 11/16 inch-5 7/16 inch
Bolt Diameter
0.5000 in
Bolt to bolt max
5.4400 in, 138.176 mm
Bolt to bolt min
4.6800 in, 118.872 mm
Bore
1 1/4 in
Bore length
1.5300 in, 38.862 mm
Duty
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 1/4 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Material
Steel
Max RPM
5500 rpm
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft centerline height
1 13/16 inch
Shaft diameter
1.2500 in
Standoff housing
No
Static load capacity
3461 lbf, 15395.295 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, non-expansion (fixed)
- Bore Diameter: 1-1/4" (31.75mm)
- Locking Mechanism: Eccentric collar locking
- Duty Rating: Intermediate duty
- Housing Material: Cast iron
- Bearing Series: 207 series ball bearing
- Sealing: DualGuard seals with flingers
- Maximum Speed: 3500 RPM
- Static Load Rating: 3461 lbf (15395 N)
- Applications: General industrial, conveyor systems, moderate load applications
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#125260
Brand
Dodge
Model
P2B-SXVB-104
#123491
Brand
Dodge
Model
F2B-SC-010
#129387
Brand
Dodge
Model
P2B-SXR-014
#129380
Brand
Dodge
Model
P2B-SXRB-111
#125238
Brand
Dodge
Model
F4B-SXV-107
#2271831
Brand
Browning
Model
767306
#497660
Brand
Link-Belt
Model
10441518
#274723
Brand
NTN Bearing
Model
JELPL-1.1/4
#326794
Brand
SKF Bearing
Model
SYH 1.1/4 FM
| Brand | Remke |
| Model | RTK-350-25 |
| Brand | Ringfeder |
| Model | 7006-2.9375 |
| Brand | Chicago-Latrobe |
| Model | 69900 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/