We never sell your data to third parties
Dodge 131978 P2B-SXV-104 two-bolt pillow block bearing with 1-1/4" bore, eccentric collar locking, intermediate duty rating, cast iron housing, wide inner ring, and DualGuard seals with flingers. Non-expansion design for fixed shaft positioning. Suitable for general purpose applications with a maximum speed of 5500 rpm.
MODEL P2B-SXV-104
Contact supplier for technical support on: +1-864-284-5700
$77.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
207 series
Base to center height
1.8800 in, 47.752 mm
Bearing Series
207 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
5.4400 in, 138.176 mm
Bolt to bolt min
4.6800 in, 118.872 mm
Bore
1 1/4 in
Bore Diameter
1-1/4" shaft size
Bore length
1.5300 in, 38.862 mm
Duty
Intermediate duty
Duty Rating
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed) bearing
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 1/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Locking Mechanism
Eccentric collar quarter-turn
Lubrication type
Grease
Material
Steel
Max RPM
5500 rpm
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sealing
DualGuard seals
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
1.2500 in
Standoff housing
No
Static load capacity
3461 lbf, 15395.295 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 131978
- Engineering Number: P2B-SXV-104
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 1-1/4" (31.75mm)
- Locking Type: Eccentric Locking
- Duty Rating: Intermediate Duty
- Housing Material: Steel
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 3.4500 lb
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5903862
Brand
Dodge
Model
P2B-SCFS-104-SHFS
#132908
Brand
Dodge
Model
P2B-SCEZ-107-PCR
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#125278
Brand
Dodge
Model
P2B-SXV-104
#125235
Brand
Dodge
Model
F4B-SXV-104
#2271772
Brand
Browning
Model
767308
#125166
Brand
Dodge
Model
LFT-SC-104S
#125260
Brand
Dodge
Model
P2B-SXVB-104
#178164
Brand
Gates Rubber
Model
A40
#676653
Brand
Bando
Model
A40
#132291
Brand
Dodge
Model
LFT-SC-102
#2282720
Brand
Browning
Model
1073071
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/