We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 128809 FC-DL-103 flanged cartridge bearing featuring 1-3/16" bore, D-Lok concentric clamp collar locking, standard duty cast iron housing, 206 series ball bearing, non-expansion configuration with DualGuard seals. 1-3/16" bore 4-Bolt Piloted Flange Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL FC-DL-103
Contact supplier for technical support on: +1-864-284-5700
$161.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
206 series
Bearing type
Ball, ball
Bolt circle
3.6300 in, 92.202 mm
Bolt Diameter
0.3750 in
Bolt to bolt max
3.6300 in, 92.202 mm
Bolt to bolt min
3.6300 in, 92.202 mm
Bore
1 3/16 in
Bore length
1.5600 in, 39.624 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
I.D.
1 3/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Max RPM
5500 rpm
Max Speed
5500 rpm
Pilot depth
0.2500 in, 6.35 mm
Pilot diameter
3.0000 in, 76.2 mm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Clamp collar
Shaft diameter
1.1875 in
Standoff housing
No
Static load capacity
2538 lbf, 11289.586 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: FC Flanged Cartridge with round piloted flange and bolt circle
- Bore Diameter: 1-3/16" (30.162 mm)
- Locking Type: D-Lok concentric clamp collar - single Allen wrench cap screw tightening
- Housing Material: Cast iron
- Duty Rating: Standard duty for general industrial applications
- Bearing Series: 206 series ball bearing
- Expansion Type: Non-expansion (fixed) - locks shaft axially
- Sealing: DualGuard single lip seal with rubberized flinger
- Max Speed: 5,500 RPM
- Static Load Rating: 2,538 lbf (11,290 N)
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
When you decide to install a roller or radial bearing, it is prudent to ensure it is done properly following the right procedure and tools. Besides, you have to ensure that all safety procedures are followed. Remember that no matter what: “You have to get it right the first time".
Read More
#5785450
Brand
Dodge
Model
P2B-SC-20M-HT
#2218137
Brand
Dodge
Model
P2B-DL-20M-HTS
#6423543
Brand
Dodge
Model
056744
#5002792
Brand
Dodge
Model
P2B-SC-20M-NLS
#123535
Brand
Dodge
Model
P2B-SCAH-012
#2257279
Brand
SealMaster
Model
705462
#2257280
Brand
SealMaster
Model
705841
| Brand | Timken Drives |
| Model | 65364 |
| Brand | LS Electric |
| Model | 1391015200 |
| Brand | Dormer Pramet |
| Model | 5986771 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/