We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 128829 P2B-DLM-115 two-bolt pillow block bearing with 1-15/16" bore, D-Lok concentric clamp collar locking, medium duty cast iron housing, DualGuard seals with flingers, non-expansion configuration, 211 series. 1-15/16" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DLM-115
Contact supplier for technical support on: +1-864-284-5700
$240.08 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
211 series
Base to center height
2.5000 in, 63.5 mm
Bearing type
Ball, ball
Bolt centerline range
6.38 inch - 7.44 inch
Bolt Diameter
0.6250 in
Bolt to bolt max
7.4400 in, 188.976 mm
Bolt to bolt min
6.3800 in, 162.052 mm
Bore
1 15/16 in
Bore length
2.0100 in, 51.054 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 15/16 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Material
Steel
Max RPM
3500 RPM
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Medium duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft centerline height
2.5 in
Shaft diameter
1.9375 in
Standoff housing
No
Static load capacity
6588 lbf, 29304.884 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
- Housing: Two-bolt pillow block, cast iron construction
- Bore Size: 1-15/16" (49.212mm)
- Locking: D-Lok concentric clamp collar for no shaft marring
- Duty Rating: Medium duty for heavier loads than normal duty
- Configuration: Non-expansion (fixed) bearing
- Sealing: DualGuard seals with flingers
- Series: 211 bearing series
- Max Speed: 3500 RPM
- Static Load: 6588 lbf
D-Lok concentric clamp design provides concentricity between bearing and shaft with single Allen wrench tightening.
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read more
#5003784
Brand
Dodge
Model
P2B-SXRB-203-HTS
#125670
Brand
Dodge
Model
P2B-DLM-115
#792177
Brand
Dodge
Model
128358
#130121
Brand
Dodge
Model
P2B-SC-207-HT
#421396
Brand
SealMaster
Model
705655
| Brand | Wiegmann |
| Model | S88120G |
| Brand | Schunk |
| Model | 9938229 |
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/