We never sell your data to third parties
Dodge 128834 P2B-DLM-208 two-bolt pillow block bearing with 2-1/2" bore, D-Lok concentric clamp collar locking, medium duty rating, 208 series ball bearing insert, cast iron housing, DualGuard seals with flingers, non-expansion design for fixed positioning. Powder coated finish, 3000 rpm maximum speed, relubrication enabled, 7.5" to 8.5" bolt centerline range, 3" shaft centerline height.
MODEL P2B-DLM-208
Contact supplier for technical support on: +1-864-284-5700
$398.74 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
214 series
Base to center height
3.0000 in, 76.2 mm
Bearing Series
214 series ball bearing insert
Bearing type
Ball, ball
Bolt centerline range
7.5 inch - 8.5 inch
Bolt Diameter
0.7500 in
Bolt to bolt max
8.5000 in, 215.9 mm
Bolt to bolt min
7.5000 in, 190.5 mm
Bore
2 1/2 in
Bore length
2.3800 in, 60.452 mm
Bore Size
2-1/2" shaft diameter
Duty
Medium duty
Duty Rating
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 1/2 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Material
Steel
Max RPM
3000 rpm
Max Speed
3000 rpm
Relubrication
Yes
Rolling element
Medium duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Seals
DualGuard single lip seals
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft centerline height
3 in
Shaft diameter
2.5000 in
Standoff housing
No
Static load capacity
9838 lbf, 43761.604 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-45,TS-300
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 128834
- Engineering Number: P2B-DLM-208
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 2-1/2" (63.5mm)
- Locking Type: Concentric Collar
- Duty Rating: Medium Duty
- Housing Material: Steel
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Medium Duty Ball
- Weight: 14.7700 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#131371
Brand
Dodge
Model
P2B-DL-207
#125673
Brand
Dodge
Model
P2B-DLM-208
#2247195
Brand
Dodge
Model
127329
#125548
Brand
Dodge
Model
P2B-DL-112
| Brand | Guardair |
| Model | N656 |
| Brand | Hubbell Wiring |
| Model | IM2SCA2EI |
| Brand | Bonfiglioli |
| Model | W 75 U D30 15 P90 B5 B8 |
| Brand | Pyramex |
| Model | RVZ2320X2 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/