We never sell your data to third parties
Dodge 123595 P2B-VSCB-012 two-bolt pillow block bearing with 3/4 inch bore, intermediate duty set screw locking, 204 series ball bearing, cast iron housing, non-expansion (fixed) design, DualGuard seals with flingers, 5000 rpm maximum speed. 3/4" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-VSCB-012
Contact supplier for technical support on: +1-864-284-5700
$55.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
204 series
Base to center height
1.2500 in, 31.75 mm
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.1900 in, 106.426 mm
Bolt to bolt min
3.3800 in, 85.852 mm
Bore
3/4 in
Bore length
1.2300 in, 31.242 mm
Duty
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
3/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
7500 rpm
Max Speed
5000 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
0.7500 in
Standoff housing
No
Static load capacity
1482 lbf, 6592.264 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with standard bolt pattern
- Bore Diameter: 3/4 inch (19.05mm) precision bore
- Locking Mechanism: 65-degree set screw for maximum holding force
- Duty Rating: Intermediate duty VSC design for moderate loads
- Housing Material: Cast iron for durability and vibration dampening
- Bearing Series: 204 series ball bearing insert
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Sealing: DualGuard seals with flingers for contamination protection
- Maximum Speed: 5000 RPM capacity
- Applications: General industrial machinery, conveyors, and standard duty rotating equipment
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 791479
Great customer service
ITEMS WERE IN STOCK, QUICK DELIVERY AND GREAT CUSTOMER SERVICE.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#132147
Brand
Dodge
Model
033593
#126948
Brand
Dodge
Model
P2B-VSCB-012
#792184
Brand
Dodge
Model
128350
#124720
Brand
Dodge
Model
033594
#2271844
Brand
Browning
Model
767561
#326705
Brand
SKF Bearing
Model
SYH 3/4 RM
#276850
Brand
NTN Bearing
Model
ARPL-3/4
#792823
Brand
AMI Bearings
Model
BLP204-12
| Brand | Te-Co |
| Model | 40104M |
| Brand | Te-Co |
| Model | 40216 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 791479
Great customer service
ITEMS WERE IN STOCK, QUICK DELIVERY AND GREAT CUSTOMER SERVICE.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/