We never sell your data to third parties
Dodge 127549 P2B-SCBEZ-40M-PCR two-bolt pillow block ball bearing with 40mm bore, set screw locking, standard duty, and non-expansion fixed configuration. E-Z Kleen corrosion-resistant design features a polymer housing with anti-microbial additive, corrosion-resistant insert, and QuadGuard seals with flingers for washdown applications. Relubrication capable.
MODEL P2B-SCBEZ-40M-PCR
Contact supplier for technical support on: +1-864-284-5700
$188.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
Washdown
Ball bearing series
208 series
Base to center height
1.9400 in, 49.276 mm
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
5.6400 in, 143.256 mm
Bolt to bolt min
5.1000 in, 129.54 mm
Bore
40mm
Bore Diameter
40mm
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Polymer
Housing Material
Polymer
Housing option
Polymer
Housing type
Two-bolt pillow block
Insert material
Plated steel
Insert option
Corrosion Resistant
Insert type
Ball Bearing
Locking
Set screw
Locking Type
65-degree set screw (E-Z Kleen SCEZ series)
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Seal Type
QuadGuard seals
Sensor ready
Adapter required
Series
208 series bearing insert
Shaft attachment
Setscrew
Shaft diameter
40.0000 mm
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 127549
- Engineering Number: P2B-SCBEZ-40M-PCR
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 40mm (40mm)
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: QuadGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 2.3000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#127116
Brand
Dodge
Model
P2B-SCBEZ-40M-PCR
#127144
Brand
Dodge
Model
WSTU-SCEZ-103-PCR
#127146
Brand
Dodge
Model
WSTU-SCEZ-107-PCR
#127145
Brand
Dodge
Model
WSTU-SCEZ-104S-PCR
#122519
Brand
Dodge
Model
LD-20X12-TUFR
| Brand | U.S.Tsubaki |
| Model | C2080HSA25LRB |
| Brand | NSI Industries |
| Model | L30NP |
| Brand | ABB |
| Model | A63-30-00-80 |
| Brand | Cooper Wiring |
| Model | OSD10DN-LA |
| Brand | Eklind |
| Model | 16503 |
| Brand | Wiegmann |
| Model | RSC182406NKSS |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/