We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 129236 P2B-GTMAH-107 two-bolt pillow block bearing with 1-7/16" bore, medium duty grip tight locking, cast iron housing, designed for air handling applications with enhanced sealing. 1-7/16" bore Pillow Block 2-Bolt Ball Bearing with Grip Tight locking used in Air Handling applications
MODEL P2B-GTMAH-107
Contact supplier for technical support on: +1-864-284-5700
$203.98 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Air handling
Base to center height
2.1300 in, 54.102 mm
Bearing type
Ball, ball
Bolt to bolt max
5.8800 in, 149.352 mm
Bolt to bolt min
5.1800 in, 131.572 mm
Bore
1 7/16 in
Bore length
1.8400 in, 46.736 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Uncoated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 7/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Material
Steel
Max RPM
8500 rpm
Relubrication
Yes
Rolling element
Medium duty ball
Seal
Single lip
Seal option
Single-lip seal with flingers
Sensor ready
Adapter required
Shaft attachment
Push-pull adapter
Shaft diameter
1.4375 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with standard 2-bolt base mount
- Bore Diameter: 1-7/16" (36.512mm)
- Locking Type: Grip tight adapter mount with 360° shaft contact, no shaft marring
- Housing Material: Cast iron
- Duty Rating: Medium duty for heavier loads than standard
- Application: Air handling (AH) variant specifically designed for HVAC applications
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Seal Type: Single-lip seal with flingers
- Max Speed: 8500 RPM
| Brand | Sunex Tools |
| Model | 818DMG |
| Brand | Bridgeport |
| Model | 261 |
| Brand | Eklind |
| Model | 51920 |
| Brand | Eklind |
| Model | 10507 |
| Brand | Drillco |
| Model | 185FCG28 |
| Brand | Wiegmann |
| Model | PB12BC |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/