We never sell your data to third parties
Dodge 129260 P2B-GTEZ-012-SHCR two-bolt pillow block bearing with 3/4" bore, Grip Tight adapter mount, and E-Z Kleen stainless steel housing with corrosion resistant insert. Features QuadGuard seal for washdown environments. 3/4" bore Pillow Block 2-Bolt Ball Bearing with Grip Tight locking used in Washdown applications
MODEL P2B-GTEZ-012-SHCR
Contact supplier for technical support on: +1-864-284-5700
$220.80 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Washdown
Base to center height
1.3100 in, 33.274 mm
Bearing type
Ball, ball
Bolt to bolt max
4.1800 in, 106.172 mm
Bolt to bolt min
3.3800 in, 85.852 mm
Bore
3/4 in
Bore length
1.4800 in, 37.592 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Stainless steel
Housing option
Stainless steel
Housing type
Two-bolt pillow block
Insert material
Plated steel
Insert option
Corrosion resistant
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Push-pull adapter
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block
- Bore Diameter: 3/4" (19.05mm)
- Locking Type: Grip Tight adapter mount - no shaft marring, 360° contact
- Housing Material: Stainless steel
- Insert Material: Corrosion resistant
- Duty Rating: Standard duty
- Seal Type: QuadGuard seal with flingers
- Product Line: E-Z Kleen corrosion resistant series
- Configuration: Non-expansion (fixed)
- Application: Ideal for washdown environments, food processing, and corrosive conditions
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Thomson Linear |
| Model | 512P25C3ES1 |
| Brand | U.S.Tsubaki |
| Model | 06B24F-1 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/