We never sell your data to third parties
Dodge 131120 F4B-SXR-110 four-bolt flange mounted ball bearing with 1-5/8 inch bore and eccentric collar locking. Cast iron housing, 209 series, DualGuard seal, standard duty rating for general industrial applications. 1-5/8" bore 4-Bolt Flange Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL F4B-SXR-110
Contact supplier for technical support on: +1-864-284-5700
$162.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
209 series
Bearing Series
209 series ball bearing insert
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
4.1300 in, 104.902 mm
Bolt to bolt min
4.1300 in, 104.902 mm
Bore
1 5/8 in
Bore Diameter
1-5/8 inch
Bore length
2.1300 in, 54.102 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed) bearing
Greasable
Yes
High temp
No
Housing
Stainless steel
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
Housing Type
Four-bolt square flange mount
I.D.
2 4/9 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Max Speed
300 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Seal Protection
DualGuard single lip seal
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
1.6250 in
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt square flange mount for surface mounting
- Bore Diameter: 1-5/8 inch (41.275 mm) with eccentric collar locking
- Locking Mechanism: Quarter-turn eccentric collar locks in direction of shaft rotation
- Housing Material: Cast iron construction for standard indoor applications
- Duty Rating: Standard duty for general purpose industrial use
- Bearing Series: 209 series ball bearing insert
- Seal Protection: DualGuard single lip seal with rubberized flinger
- Expansion Type: Non-expansion (fixed) bearing for shaft positioning
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#130662
Brand
Dodge
Model
F2B-SXR-106
#123711
Brand
Dodge
Model
WSTU-SCM-203
#129355
Brand
Dodge
Model
F4B-SXR-207
#123495
Brand
Dodge
Model
F2B-SC-012
#125223
Brand
Dodge
Model
F2B-SXV-104S
#269126
Brand
NTN Bearing
Model
UELFU-1.5/8
| Brand | Wiegmann |
| Model | HW-J80604CHQRW |
| Brand | GPI |
| Model | 118003-2 |
| Brand | Orbit Industries |
| Model | CO-3T |
| Brand | Edwards |
| Model | PDOS1-3/32 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/