We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 131817 P2B-SXR-115 two-bolt pillow block ball bearing with 1-15/16" (49.212mm) bore, eccentric collar locking, standard duty cast iron housing, 210 series, DualGuard seals, non-expansion (fixed) mounting. 1-15/16" bore Pillow Block 2-Bolt Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL P2B-SXR-115
Contact supplier for technical support on: +1-864-284-5700
$161.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
210 series
Base to center height
1.2500 in, 31.75 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
6.6800 in, 169.672 mm
Bolt to bolt min
6.0000 in, 152.4 mm
Bore
1 15/16 in
Bore length
2.2500 in, 57.15 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 15/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Material
Steel
Max RPM
4500 rpm
Max Speed
3000 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
1.9375 in
Standoff housing
No
Static load capacity
5213 lbf, 23188.579 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-30, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 1-15/16" (49.212mm)
- Locking Type: Eccentric collar (quarter-turn locking in rotation direction)
- Duty Rating: Standard duty for general purpose applications
- Series: 210 series ball bearing insert
- Seals: DualGuard single lip seals with rubberized flingers
- Mounting: Non-expansion (fixed) for shaft positioning
- Max Speed: 3,000 RPM
- Applications: General industrial equipment, conveyors, fans, agricultural machinery
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#129430
Brand
Dodge
Model
P2B-SXR-115
#2217983
Brand
Dodge
Model
P2B-SXRED-200S
#123424
Brand
Dodge
Model
P2B-SCB-115-HT
#128803
Brand
Dodge
Model
P2B-VSC-50M
#5903695
Brand
Dodge
Model
P2B-SCMAH-111-HT-DRY
#2272126
Brand
Browning
Model
767918
#498349
Brand
Link-Belt
Model
10436814
#269075
Brand
NTN Bearing
Model
UELP-1.15/16
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/