We never sell your data to third parties
Dodge 124204 F4B-SC-102 four-bolt flange mounted ball bearing with 1-1/8" bore, 65-degree set screw locking, standard duty cast iron housing, DualGuard seals with flingers, 206 series, non-expansion (fixed) design for general industrial applications. 1-1/8" bore 4-Bolt Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL F4B-SC-102
Contact supplier for technical support on: +1-864-284-5700
$105.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
206 series
Bearing Series
206 series ball bearing
Bearing type
Ball, ball
Bolt Diameter
0.4375 in
Bolt to bolt max
3.2500 in, 82.55 mm
Bolt to bolt min
3.2500 in, 82.55 mm
Bore
1 1/8 in
Bore Diameter
1-1/8"
Bore length
1.5200 in, 38.608 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Stainless steel
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
Housing Type
Four-bolt square flange mount
I.D.
2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
65-degree set screw
Lubrication type
Grease
Max RPM
6500 rpm
Max Speed
4500 rpm
Maximum Speed
4500 rpm capability
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Seal System
DualGuard single lip seals
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
1.1250 in
Standoff housing
No
Static load capacity
2538 lbf, 11289.586 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#125286
Brand
Dodge
Model
P2B-SXVB-012
#5003229
Brand
Dodge
Model
P2B-DL-25M-LLS
#2218137
Brand
Dodge
Model
P2B-DL-20M-HTS
#125539
Brand
Dodge
Model
P2B-DL-012
#126948
Brand
Dodge
Model
P2B-VSCB-012
#2255848
Brand
SealMaster
Model
SF-18
#2272068
Brand
Browning
Model
767811
#217567
Brand
IPTCI Bearing
Model
UCF 206 18
#126898
Brand
Dodge
Model
F4B-VSC-102
#17323
Brand
AMI Bearings
Model
UCF206-18
#492125
Brand
Link-Belt
Model
10409060
#326904
Brand
SKF Bearing
Model
FY 1.1/8 TF
#2206286
Brand
PTI
Model
UCF206-18
| Brand | Pfannenberg |
| Model | 23351805000 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/