We never sell your data to third parties
Dodge 124602 LF-SC-012 three-bolt light duty flange bearing with 3/4" (19.05mm) bore, zinc housing, 65° set screw locking, non-expansion fixed design, DualGuard seals, standard duty ball bearing insert, 204 series. 3/4" bore 3-Bolt Light Duty Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL LF-SC-012
Contact supplier for technical support on: +1-864-284-5700
$58.36 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
204 series
Bearing type
Ball, ball
Bolt circle
2.8100 in, 71.374 mm
Bolt Diameter
0.3438 in
Bore
3/4 in
Bore length
1.0200 in, 25.908 mm
Duty
Light Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Zinc
Housing option
Cast iron
Housing type
Three-bolt flange (light duty)
I.D.
3/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
7500 rpm
Max Speed
5000 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
0.7500 in
Standoff housing
No
Static load capacity
1482 lbf, 6592.264 N
Suitable for high temperature
No
Suitable for washdown
No
Type
3-bolt light duty flange
- Housing Type: Three-bolt light duty flange (LF)
- Bore Diameter: 3/4" (19.05mm)
- Locking Type: 65° set screw for maximum holding force
- Housing Material: Zinc construction
- Insert: Standard duty ball bearing
- Duty Rating: Light duty applications
- Expansion Type: Non-expansion (fixed) - locates shaft axially
- Seals: DualGuard single lip seal with rubberized flinger
- Series: 204 series ball bearing insert
- Speed Rating: Up to 5000 RPM
- Applications: Ideal for lighter load surface mounting where space is limited
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123535
Brand
Dodge
Model
P2B-SCAH-012
#125286
Brand
Dodge
Model
P2B-SXVB-012
#2218137
Brand
Dodge
Model
P2B-DL-20M-HTS
#6423543
Brand
Dodge
Model
056744
#123363
Brand
Dodge
Model
P2B-SC-012
#40044
Brand
Boston Gear
Model
64562
| Brand | Cutler Hammer |
| Model | D970DNEMM |
| Brand | Remke |
| Model | 106AB0300A1 |
| Brand | Remke |
| Model | RSM-40416 |
| Brand | Fastube |
| Model | FOAM |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/