We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 062542 F4B-SCEZ-200-SHCR four-bolt flange bearing with 2" bore, stainless steel housing, corrosion resistant insert, set screw locking. E-Z Kleen washdown series featuring QuadGuard seals. 210 series normal duty. 2" bore 4-Bolt Flange Ball Bearing with Set Screw locking used in Washdown applications
MODEL F4B-SCEZ-200-SHCR
Contact supplier for technical support on: +1-864-284-5700
$350.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
Washdown
Ball bearing series
210 series
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
4.3800 in, 111.252 mm
Bolt to bolt min
4.3800 in, 111.252 mm
Bore
2 in
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Stainless steel
Housing option
Stainless steel
Housing type
Four-bolt flange
I.D.
1 7/8 in
Insert material
Plated steel
Insert option
Corrosion resistant
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
2.0000 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Type
4-bolt flange
- Housing Type: Four-bolt flange mount
- Bore Diameter: 2" (50.8mm)
- Locking Type: Set screw (65 degree setscrew locking)
- Housing Material: Stainless steel
- Insert Material: Corrosion resistant
- Duty Rating: Normal duty
- Product Line: E-Z Kleen washdown series
- Seals: QuadGuard seals with stainless rubberized flinger
- Bearing Series: 210 series
- Expansion Type: Non-expansion (fixed)
- Applications: Corrosive environments, washdown areas, food processing
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5003229
Brand
Dodge
Model
P2B-DL-25M-LLS
#130461
Brand
Dodge
Model
F4B-SCEZ-200-SHCR
#126948
Brand
Dodge
Model
P2B-VSCB-012
#125286
Brand
Dodge
Model
P2B-SXVB-012
#125623
Brand
Dodge
Model
P2B-DLB-012
| Brand | Telemecanique |
| Model | TSXLES20 |
| Brand | Gates Rubber |
| Model | BK24.1/2 |
| Brand | Telemecanique |
| Model | 2160B421AA-22 |
| Brand | Berkeley |
| Model | BVMX20-3-102 |
| Brand | Berkeley |
| Model | BVMX3-19-102 |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/