We never sell your data to third parties
Dodge 131121 F4B-SXR-111 four-bolt flange bearing with 1-11/16" bore, eccentric collar locking, standard duty rating, 209 series ball bearing, cast iron housing, DualGuard seal, non-expansion design for fixed shaft positioning. 1-11/16" bore 4-Bolt Flange Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL F4B-SXR-111
Contact supplier for technical support on: +1-864-284-5700
$148.83 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
209 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
4.1300 in, 104.902 mm
Bolt to bolt min
4.1300 in, 104.902 mm
Bore
1 11/16 in
Bore length
2.1300 in, 54.102 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
1 1/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Max RPM
5000 rpm
Max Speed
300 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Eccentric collar
Shaft diameter
1.6875 in
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt flange mount for surface mounting applications
- Bore Diameter: 1-11/16" (42.862mm) shaft size
- Locking Mechanism: Quarter-turn eccentric collar locks in direction of shaft rotation
- Duty Rating: Standard duty for normal industrial loads
- Bearing Series: 209 series ball bearing insert
- Housing Material: Cast iron construction for durability
- Seal Type: DualGuard single lip seal with rubberized flinger
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Applications: General purpose industrial machinery, conveyor systems, pumps
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
When you decide to install a roller or radial bearing, it is prudent to ensure it is done properly following the right procedure and tools. Besides, you have to ensure that all safety procedures are followed. Remember that no matter what: “You have to get it right the first time".
Read More
#129427
Brand
Dodge
Model
P2B-SXR-111-NL
#123422
Brand
Dodge
Model
P2B-SCB-111-HT
#5003748
Brand
Dodge
Model
P2B-DLB-111-HTS
#5782925
Brand
Dodge
Model
P2B-DLH-111-E-HT-DRY
#125264
Brand
Dodge
Model
P2B-SXVB-111
#2272049
Brand
Browning
Model
767928
#2197814
Brand
PTI
Model
FWS209-27A
#15210
Brand
AMI Bearings
Model
UGSLF209-27
#492388
Brand
Link-Belt
Model
10422615
#326932
Brand
SKF Bearing
Model
FY 1.11/16 WF
#269132
Brand
NTN Bearing
Model
UELFU-1.11/16
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/