We never sell your data to third parties
Dodge 124601 LF-SC-010 three-bolt light duty flange bearing with 5/8" bore diameter. Alloy housing, set screw locking mechanism, 203 series ball bearing insert. DualGuard seals, 5000 RPM max speed, non-expansion (fixed) design for precise shaft 5/8" bore 3-Bolt Light Duty Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL LF-SC-010
Contact supplier for technical support on: +1-864-284-5700
$53.63 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
203 series
Bearing Series
203 series ball bearing insert
Bearing type
Ball, ball
Bolt circle
2.5000 in, 63.5 mm
Bolt Diameter
0.2813 in
Bore
5/8 in
Bore Diameter
5/8"
Bore length
1.0000 in, 25.4 mm
Duty
Light Duty
Duty Rating
Light duty applications
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Alloy
Housing Material
Alloy
Housing option
Cast iron
Housing type
Three-bolt flange (light duty)
I.D.
5/8 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
65-degree set screw
Lubrication type
Grease
Max RPM
7500 rpm
Max Speed
5000 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Seal Type
DualGuard single lip seals
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
0.6250 in
Standoff housing
No
Static load capacity
1079 lbf, 4799.631 N
Static Load Rating
1079 lbf (4800 N)
Suitable for high temperature
No
Suitable for washdown
No
Type
3-bolt light duty flange
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5785450
Brand
Dodge
Model
P2B-SC-20M-HT
#6423543
Brand
Dodge
Model
056744
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
#123363
Brand
Dodge
Model
P2B-SC-012
#130855
Brand
Dodge
Model
LF-SC-010
#197172
Brand
HubCity
Model
1002-01802
| Brand | ABB |
| Model | AO810 |
| Brand | Drillco |
| Model | 95CT164 |
| Brand | Irwin Tools |
| Model | 4034ZR |
| Brand | Wiegmann |
| Model | BN4060604AL |
| Brand | Littelfuse |
| Model | LSCR002 |
| Brand | Drillco |
| Model | 93SE232 |
| Brand | Te-Co |
| Model | 30301 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/