We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 128708 P2B-DL-106 two-bolt pillow block bearing with 1-3/8" (34.925mm) bore. D-Lok concentric clamp collar provides secure shaft attachment without marring. Cast iron housing, 207 series ball bearing, non-expansion design for fixed positioning. 1-3/8" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DL-106
Contact supplier for technical support on: +1-864-284-5700
$148.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
207 series
Base to center height
1.8800 in, 47.752 mm
Bearing type
Ball, ball
Bolt centerline range
4 11/16 inch-5 5/16 inch
Bolt Diameter
0.5000 in
Bolt to bolt max
5.4400 in, 138.176 mm
Bolt to bolt min
4.6800 in, 118.872 mm
Bore
1 3/8 in
Bore length
1.7500 in, 44.45 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 3/8 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Material
Steel
Max RPM
5500 rpm
Max Speed
5500 rpm
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft centerline height
1 7/8 inch
Shaft diameter
1.3750 in
Standoff housing
No
Static load capacity
3461 lbf, 15395.295 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with standard base mount
- Bore Diameter: 1-3/8" (34.925mm) precision bore
- Locking Type: D-Lok concentric clamp collar - single Allen wrench tightening
- Housing Material: Cast iron for durability and dimensional stability
- Bearing Series: 207 series ball bearing for 1-3/8" shaft applications
- Expansion Type: Non-expansion (fixed) - locks shaft axially for positioning
- Seal Protection: DualGuard seals with rubberized flingers
- Duty Rating: Standard duty for general industrial applications
- Key Benefits: Concentric shaft attachment, no shaft marring, easy single-wrench installation
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5903862
Brand
Dodge
Model
P2B-SCFS-104-SHFS
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#130893
Brand
Dodge
Model
P2B-DL-106
#132908
Brand
Dodge
Model
P2B-SCEZ-107-PCR
#2257174
Brand
SealMaster
Model
NP-22T
#2275759
Brand
Browning
Model
766185
| Brand | Harwal |
| Model | VA-450V |
| Brand | Dongan |
| Model | GT-10190.286 |
| Brand | LS Electric |
| Model | 02144455UL |
| Brand | Nachi Bearing |
| Model | 6208NRC3 |
| Brand | Edwards |
| Model | AC0903-S |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/