We never sell your data to third parties
Dodge 127722 P2B-DLEZ-115-SHCR two-bolt pillow block bearing with 1-15/16" (49.212mm) bore, D-Lok concentric clamp collar, stainless steel housing, corrosion resistant insert, QuadGuard seals, 210 series ball bearing for washdown environments. 1-15/16" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in Washdown applications
MODEL P2B-DLEZ-115-SHCR
Contact supplier for technical support on: +1-864-284-5700
$437.39 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
Washdown
Ball bearing series
210 series
Base to center height
2.2500 in, 57.15 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
6.6800 in, 169.672 mm
Bolt to bolt min
5.7600 in, 146.304 mm
Bore
1 15/16 in
Bore Diameter
1-15/16"
Bore length
2.0100 in, 51.054 mm
Configuration
Non-expansion (fixed)
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Stainless steel
Housing option
Stainless steel
Housing type
Two-bolt pillow block
Insert material
Plated steel
Insert option
Corrosion resistant
Insert type
Ball Bearing
Insert Type
Corrosion resistant, 210 series ball bearing
Locking
Concentric collar
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft diameter
1.9375 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Take-up frame size
LD-30, TS-300
Type
Pillow block 2-Bolt
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123424
Brand
Dodge
Model
P2B-SCB-115-HT
#2217983
Brand
Dodge
Model
P2B-SXRED-200S
#128803
Brand
Dodge
Model
P2B-VSC-50M
#131005
Brand
Dodge
Model
P2B-DLEZ-115-SHCR
#122535
Brand
Dodge
Model
LD-30X24-TUFR
| Brand | Royal Products |
| Model | 70589 |
| Brand | Cutler Hammer |
| Model | E26B9V4 |
| Brand | Wiegmann |
| Model | SSN4426012WF3PT |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-458414 |
| Brand | Schunk |
| Model | 25001000 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/