We never sell your data to third parties
Dodge 129448 P2B-GTAH-11 two-bolt pillow block bearing with 1-11/16" bore, Grip Tight adapter mount, and air handling configuration. Cast iron housing, standard duty construction, 211 series. Non-expansion fixed bearing for HVAC applications. Single-lip seal with flingers, bearing steel insert, relubrication capable.
MODEL P2B-GTAH-11
Contact supplier for technical support on: +1-864-284-5700
$264.60 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
Air handling
Ball bearing series
211 series
Base to center height
2.5000 in, 63.5 mm
Bearing type
Ball, ball
Bolt to bolt max
7.4400 in, 188.976 mm
Bolt to bolt min
6.3800 in, 162.052 mm
Bore
11
Bore Diameter
1-11/16" (1.6875")
Bore length
1.9300 in, 49.022 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Locking Type
Grip Tight adapter mount - no shaft marring, 360° contact
Lubrication type
Grease
Max Speed
4300 rpm
Maximum Speed
4, 300 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
Single-lip seal with flingers
Sensor ready
Adapter required
Series
211 series
Shaft attachment
Push-pull adapter
Standoff housing
No
Static load capacity
6588 lbf, 29304.884 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 129448
- Engineering Number: P2B-GTAH-11
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 11
- Locking Type: Grip Tight
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: Single-lip seal with flingers
- Bearing Type: Standard Duty Ball
- Weight: 6.8700 lb
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | JW Winco |
| Model | 820.4-75-NLC |
| Brand | Rocky Mountain Twist |
| Model | 95000528 |
| Brand | Gates Rubber |
| Model | T5-260-4 |
| Brand | Champion |
| Model | CT300-13/16 |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/