We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 123806 P2B-SC-100 two-bolt pillow block bearing with 1" bore, 65 degree set screw locking, cast iron housing, standard duty ball bearing insert, DualGuard seal, non-expansion fixed configuration, 205 series. 1" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SC-100
Contact supplier for technical support on: +1-864-284-5700
$83.59 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
205 series
Base to center height
1.4400 in, 36.576 mm
Bearing component
Mounted Bearing
Bearing type
Ball, ball
Bolt centerline range
4 1/4 inch-4 1/2 inch
Bolt Diameter
0.3750 in
Bolt to bolt max
4.5000 in, 114.3 mm
Bolt to bolt min
3.6900 in, 93.726 mm
Bore
1 in
Bore length
1.3400 in, 34.036 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
7500 rpm
Max Speed
4500 rpm
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft centerline height
1 7/16 inch
Shaft diameter
1.0000 in
Standoff housing
No
Static load capacity
1769 lbf, 7868.904 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 1 inch (25.4mm)
- Locking Type: 65 degree set screw for maximum holding power
- Bearing Series: 205 series standard duty ball bearing
- Configuration: Non-expansion (fixed) for shaft positioning
- Seal System: DualGuard single lip seal with rubberized flinger
- Max Speed: 4,500 RPM
- Static Load Rating: 1,769 lbf (7,869 N)
- Weight: 1.59 lbs
- Applications: General industrial machinery, conveyors, fans, pumps where reliable shaft support is required
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#125539
Brand
Dodge
Model
P2B-DL-012
#131696
Brand
Dodge
Model
P2B-SC-100
#126948
Brand
Dodge
Model
P2B-VSCB-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#792144
Brand
Dodge
Model
128351
#421836
Brand
SealMaster
Model
700180
#130976
Brand
Dodge
Model
P2B-VSC-100
#2272202
Brand
Browning
Model
767625
#2271868
Brand
Browning
Model
767580
#17839
Brand
AMI Bearings
Model
UCP205-16
#498050
Brand
Link-Belt
Model
10406439
| Brand | Edwards |
| Model | PD17/32 |
| Brand | Timken |
| Model | 5119 |
| Brand | Nexen |
| Model | 960147 |
| Brand | Littelfuse |
| Model | 10E1C2.75 |
| Brand | Edwards |
| Model | PD25/32 |
| Brand | Edwards |
| Model | PD7/16 |
| Brand | Drillco |
| Model | 428N220 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/