We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 129770 FC-GTM-215 flanged cartridge bearing with 2-15/16" (74.612mm) bore. Medium duty Grip Tight adapter mount with cast iron housing. DualGuard seals, no shaft marring. Max speed 4500 RPM. 2-15/16" bore 4-Bolt Piloted Flange Ball Bearing with Grip Tight locking used in General Purpose applications
MODEL FC-GTM-215
Contact supplier for technical support on: +1-864-284-5700
$654.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Bearing type
Ball, ball
Bolt circle
7.5000 in, 190.5 mm
Bore
2 15/16 in
Bore length
2.7000 in, 68.58 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Uncoated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
I.D.
2 15/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Max RPM
4500 rpm
Pilot depth
1.2500 in, 31.75 mm
Pilot diameter
6.3750 in, 161.925 mm
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Push-pull adapter
Shaft diameter
2.9375 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: Flanged Cartridge (FC) - round piloted flange with bolt circle
- Bore Size: 2-15/16" (74.612mm) exact
- Locking Mechanism: Grip Tight adapter mount - 360° shaft contact, no shaft marring
- Duty Rating: Medium (GTM) - enhanced load capacity vs normal duty
- Housing Material: Cast iron construction
- Sealing: DualGuard seals with flingers
- Maximum Speed: 4500 RPM
- Mounting: Non-expansion (fixed) - axially locked in housing
- Applications: HVAC systems, general industrial, turned/ground/polished shafts
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Consolidated Bearings |
| Model | 20210 M |
| Brand | Consolidated Bearings |
| Model | F6-14M |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/