We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 126818 P2B-SCM-207 two-bolt pillow block bearing with 2-7/16" (61.912mm) bore, 65 degree set screw locking, medium duty cast iron housing, 214 series ball bearing insert, DualGuard seals, non-expansion fixed mount design. 2-7/16" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SCM-207
Contact supplier for technical support on: +1-864-284-5700
$302.74 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
214 series
Base to center height
3.0000 in, 76.2 mm
Bearing type
Ball, ball
Bolt centerline range
7 1/2 inch-8 1/2 inch
Bolt Diameter
0.7500 in
Bolt to bolt max
8.5000 in, 215.9 mm
Bolt to bolt min
7.5000 in, 190.5 mm
Bore
2 7/16 in
Bore length
2.5400 in, 64.516 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 7/16 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
3000 rpm
Max Speed
2000 RPM
Relubrication
Yes
Rolling element
Medium duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft centerline height
3 in
Shaft diameter
2.4375 in
Standoff housing
No
Static load capacity
9838 lbf, 43761.604 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-45,TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block cast iron construction
- Bore Diameter: 2-7/16" (61.912mm)
- Locking Type: 65 degree set screw for maximum holding force
- Duty Rating: Medium duty for heavier loads than standard SC bearings
- Series: 214 series ball bearing insert
- Mounting: Non-expansion (fixed) - locates shaft position
- Sealing: DualGuard single lip seals with rubberized flingers
- Max Speed: 2000 RPM
- Weight: 12.98 lbs
- Applications: Industrial machinery, conveyor systems, moderate to heavy-duty applications requiring shaft positioning
#123425
Brand
Dodge
Model
P2B-SCB-115-NL
#2247194
Brand
Dodge
Model
127328
#123395
Brand
Dodge
Model
P2B-SCAH-115-FF
#133896
Brand
Dodge
Model
P2B-SCM-207
#5120
Brand
AMI Bearings
Model
UCPX12-39
#269408
Brand
NTN Bearing
Model
UCPX-2.7/16
#196650
Brand
HubCity
Model
1001-01212
#2256905
Brand
SealMaster
Model
MP-39C
#604210
Brand
PEER Bearing
Model
GRP212-39
| Brand | Timken |
| Model | 710106 |
| Brand | Champion |
| Model | 704-17/32 |
| Brand | Generac |
| Model | CS33040BMN |
| Brand | Flowtrend |
| Model | 40MPG-1-DSO |
| Brand | Nexen |
| Model | 967227 |
| Brand | Dodge |
| Model | 120472 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/