We never sell your data to third parties
Dodge 123874 P2B-SCB-203 two-bolt pillow block bearing with 2-3/16" bore, set screw locking, standard duty ball bearing insert, and cast iron housing. Non-expansion fixed design with DualGuard seals and flingers for reliable operation in general purpose applications. Maximum speed 4000 RPM, relubrication enabled, powder coated finish.
MODEL P2B-SCB-203
Contact supplier for technical support on: +1-864-284-5700
$218.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
211 series
Base to center height
2.4400 in, 61.976 mm
Bearing type
Ball, ball
Bearing Type
Standard duty ball bearing
Bolt Diameter
0.6250 in
Bolt to bolt max
7.4400 in, 188.976 mm
Bolt to bolt min
6.3800 in, 162.052 mm
Bore
2 3/16 in
Bore Diameter
2-3/16" with 211 bearing series
Bore length
2.2200 in, 56.388 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing Material
Class 25/30 cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
2 3/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Method
65 degree set screw
Lubrication type
Grease
Material
Steel
Max RPM
4000 rpm
Max Speed
2500 RPM
Maximum Speed
2, 500 RPM operating capability
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Seal System
DualGuard single lip seal
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
2.1875 in
Standoff housing
No
Static load capacity
6588 lbf, 29304.884 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 123874
- Engineering Number: P2B-SCB-203
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 2-3/16" (55.562mm)
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Housing Material: Steel
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 7.0700 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5904083
Brand
Dodge
Model
P2B-DLH-115-E-LL
#5782923
Brand
Dodge
Model
P2B-SCMAH-115-HT-DRY
#5904119
Brand
Dodge
Model
P2B-DLM-115-LL
#134089
Brand
Dodge
Model
P2B-SCB-203
#123389
Brand
Dodge
Model
P2B-SC-203
#123379
Brand
Dodge
Model
P2B-SC-107
#421873
Brand
SealMaster
Model
700188
#2272120
Brand
Browning
Model
767385
#2272144
Brand
Browning
Model
767384
#2272046
Brand
Browning
Model
767383
#2272137
Brand
Browning
Model
767363
#326903
Brand
SKF Bearing
Model
SY 2.3/16 TF
| Brand | Cle-Line |
| Model | C00748 |
| Brand | Bondhus |
| Model | 00005 |
| Brand | Wiegmann |
| Model | HW-WM3024CS |
| Brand | Eklind |
| Model | 29016 |
| Brand | Pfannenberg |
| Model | 11677154050 |
| Brand | Bondhus |
| Model | 10609 |
| Brand | Bondhus |
| Model | 180 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/