We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 128705 P2B-DLU-103 two-bolt pillow block bearing with 1-3/16" bore, concentric collar locking, 206 series ball bearing insert, cast iron housing, standard duty rating, non-expansion fixed mount. 1-3/16" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DLU-103
Contact supplier for technical support on: +1-864-284-5700
$125.78 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
206 series
Base to center height
1.6300 in, 41.402 mm
Bearing type
Ball, ball
Bolt centerline range
4 7/16 inch-5 3/16 inch
Bolt Diameter
0.5000 in
Bolt to bolt max
5.0000 in, 127.0 mm
Bolt to bolt min
4.2500 in, 107.95 mm
Bore
1 3/16 in
Bore length
1.5200 in, 38.608 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 3/16 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Material
Steel
Max RPM
5500 rpm
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft centerline height
1 11/16 inch
Shaft diameter
1.1875 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with cast iron construction
- Bore Size: 1-3/16" (30.162mm) diameter shaft
- Locking Mechanism: Concentric collar for secure shaft attachment
- Bearing Series: 206 series ball bearing insert
- Duty Rating: Standard duty for general industrial applications
- Mount Type: Non-expansion (fixed) for shaft positioning
- Seal Protection: DualGuard seals with flingers
- Max Speed: 5,500 RPM operating capability
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read more
#127074
Brand
Dodge
Model
P2B-SCEZ-107-P
#5903862
Brand
Dodge
Model
P2B-SCFS-104-SHFS
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#134280
Brand
Dodge
Model
P2B-DLU-103
#2272115
Brand
Browning
Model
767540
#129470
Brand
Dodge
Model
P2B-SXRU-103
#2275753
Brand
Browning
Model
766182
#422359
Brand
SealMaster
Model
705376
#498326
Brand
Link-Belt
Model
10421550
#269074
Brand
NTN Bearing
Model
UELP-1.3/16
| Brand | Dodge |
| Model | 042283 |
| Brand | Kipp |
| Model | K0729.105 |
| Brand | Orbit Industries |
| Model | SS5500 |
| Brand | Dodge |
| Model | 114151 |
| Brand | Hyde Tools |
| Model | 43520 |
| Brand | MasterDrive |
| Model | B26 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/