We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The SKF FYK 40 TF is a 40mm shaft 2-bolt cast-iron square flange bearing unit with set screw locking. The pre-lubricated insert bearing is housed in a durable cast-iron flange for reliable support in conveyor, fan, and general industrial applications.
MODEL FYK 40 TF
$126.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
For material handling applications
Attachment Bolt Diameter
12 mm
Basic Dynamic Load Rating
30.7 kN
Basic Static Load Rating
19 kN
Bearing Material
Bearing steel
Bearing Sealing
Seal and flinger on both sides
Bore Type
Cylindrical
Centre Distance Between Bolt Holes
101.5 mm
Coating
Without
Fastening Bolt Hole Type
Plain
Flanged Housing Type
Square
Grease Fitting
Without
Hexagonal Key Size for Set Screw
4 mm
Housing
Composite
Housing Overall Width
39 mm
Housing Type
Flanged
I.D.
1 4/7 in
Inner Ring Retaining Feature
Set screws
Limiting Speed
4800 r/min
Lubricant
Grease
Number of Bolt Holes for Fasteners
4
Pack Height
146 mm
Pack Length
144 mm
Pack Width
63 mm
Relubrication Hole
Without
Rubber Seating Ring
Without
Sealing Type
Contact, standard
Set Screw
M8x1
Set Screw Tightening Torque
6.5 N·m
Shaft Diameter
40 mm
Total Bearing Width
49.2 mm
Unit Sealing
Optional end cover
Square flanged ball bearing unit with set screw locking and extended inner ring, composite housing, ISO
These square flanged ball bearing units are compliant with ISO standards. The unit consists of an insert bearing, with an extended inner ring and set screw locking, and is suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a composite housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
- Chemical resistant
- Pre-lubricated for life
- Lightweight
- Strong
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | FYH Bearing |
| Model | EBP20720KG5 |
| Brand | Fenner Industrial Motion |
| Model | 1032031E |
| Brand | Dichtomatik |
| Model | 55X63X7/10WPM |
| Brand | Dixon |
| Model | VN2500-200 |
| Brand | Rocky Mountain Twist |
| Model | 95111033 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF