We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
INA GIHNRK40LO Elges rod end
MODEL GIHNRK40LO
$380.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
I.D.
1.575
O.D.
2.441
Specifications
| d | 40 mm | Bore tolerance: H7 (arithmetic mean value)Tolerance: +0,072 / +0,037 |
|---|---|---|
| d 2 | 89 mm | |
| l 4 | 141,5 mm |
| 0,043 - 0,12 mm | Radial internal clearance | |
| B | 40 mm | Tolerance: 0 / -0,25 |
| C 1 | 32 mm | |
| C 2 | 26 mm | |
| D | 62 mm | |
| d 1 | 46 mm | |
| d 3 | M33X2 | |
| d 4 | 47 mm | |
| d 5 | 80 mm | |
| d 6 | M10X25 | Socket head cap screw to DIN 912-10. 9 |
| d K | 53 mm | |
| F Z | 80000 N | Nominal cylinder force |
| h 1 | 97 mm | |
| l 3 | 46 mm | |
| l 7 | 41 mm | |
| r 1s min | 0,6 mm | Chamfer dimension |
| α | 4 ° |
| Thread runout or thread groove at manufacturer's discretion | ||
| m | 2,1 kg | Mass |
| C r | 99100 N | Basic dynamic load rating, radial |
| C 0r | 176000 N | Basic static load rating, radialBasic load rating of housing |
| M A | 64 Nm | Nut tightening torque |
| 80 | Nominal cylinder force |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-832196 |
| Brand | NSI Industries |
| Model | SPM-21L |
| Brand | Superlok |
| Model | SNI-4 |
| Brand | SMC |
| Model | NCMB075-0400C |
| Brand | Consolidated Bearings |
| Model | NNTR-70-2RS |
| Brand | United Abrasives |
| Model | 57200 |
