We never sell your data to third parties
INA KR16PP Stud type track roller
MODEL KR16PP
$56.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
I.D.
0.236
O.D.
0.63
Specifications
| D | 16 mm | |
|---|---|---|
| d 1 | 6 mm | Tolerance: h7 |
| B | 28 mm |
| 1,5 mm | Lubrication nipple | |
| B 1 max | 12,2 mm | |
| B 2 | 16 mm | |
| C | 11 mm | |
| C 1 | 0,6 mm | |
| d 2 | 12,5 mm | |
| G | M6(X1) | |
| I G | 8 mm | |
| r min | 0,15 mm |
| m | 18 g | Mass |
|---|---|---|
| M A | 3 Nm | Nut tightening torque |
| C r w | 3150 N | Effective dynamic load rating as track roller (radial) |
| C 0r w | 3350 N | Effective static load rating as track roller (radial) |
| C ur w | 450 N | Fatigue limit load |
| n D G | 14000 1/min | Speed (with continuous operation and grease lubrication) |
| NIPA1 | Drive fit lubrication nippleDrive fit lubrication nipples are supplied loose. Only these lubrication nipples should be used. | |
| Relubrication hole only on the flange-side end face with slot for countertensioning during fitting. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
