We never sell your data to third parties
FAG 6026 deep groove ball bearing with 140mm bore and 210mm OD. This open bearing is designed for high radial and moderate axial loads. Suitable for general industrial applications requiring reliable performance.
MODEL 6026
$564.48 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
B
33 mm
D
200 mm
d
130 mm
D 1
177, 9 mm
d 1
153, 3 mm
D a max
191, 2 mm
d a min
138, 8 mm
I.D.
5.512
Limiting speed
4500 1/min n G
Mass
3, 42 kg m
O.D.
8.268
r a max
2 mm
r min
2 mm
Reference speed
4350 1/min n B
Specifications
| d | 130 mm |
| D | 200 mm |
| B | 33 mm |
| D 1 | 177, 9 mm |
| D a max | 191, 2 mm |
| d 1 | 153, 3 mm |
| d a min | 138, 8 mm |
| r a max | 2 mm |
| r min | 2 mm |
| Mass | 3, 42 kg | m |
|---|---|---|
| Basic dynamic load rating, radial | 113000 N | C r |
| Basic static load rating, radial | 101000 N | C 0r |
| Limiting speed | 4500 1/min | n G |
| Reference speed | 4350 1/min | n B |
| Fatigue limit load, radial | 4850 N | C ur |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#320170
Brand
SKF Bearing
Model
6026
#284018
Brand
NTN Bearing
Model
6026
#2301473
Brand
Rollway
Model
6026
#5033482
Brand
NSK Bearings
Model
6026
| Brand | Alvord-Polk Tool |
| Model | 155-H-10 |
| Brand | Bunting Bearings |
| Model | CB445248 |
| Brand | FK Bearing |
| Model | 1101 |
