We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
IPTCI Bearing NAPL 205 16 L3 Pillow Block Eccentric Locking Collar Low Shaft Height Bore Dia. 1" Wide Inner Race Insert Triple Lip Seal
MODEL NAPL 205 16 L3
Contact supplier for technical support on: 704 588 1091
$35.88 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
A
5 1/2
B
1 1/2
Bolt Used
3/8
Cast iron housing Wide inner race bearing
Yes
E
4 1/8
G
5/8
H
1 5/16
S1
7/16
S2
11/16
Unit Number
NAPL 205-16NAPL 205-16
W
2 45/64
Low shaft height with eccentric locking collar.
- Standard duty
- Cast iron housing
- Wide inner race bearing
- B-type or L3-type seals
Unit Number: NAPL 205-16NAPL 205-16
| H | A | E | B | S2 | S1 | G | W | Bi | N | M | J | K | Bolt Used |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 5/16 | 5 1/2 | 4 1/8 | 1 1/2 | 11/16 | 7/16 | 5/8 | 2 45/64 | 1.7441 | 0.6850 | 0.6850 | 0.3740 | 1.5000 | 3/8 |
Dimensions are in Inches.
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read more