We never sell your data to third parties
IPTCI UCT207-20 Take-Up Unit Set Screw mounted ball bearing unit with 1-1/4" bore. Wide slot take-up frame with set screw locking. Standard lip seal. Cast iron housing. Suitable for conveyor belt tensioning and chain drive tensioning applications.
MODEL UCT 207 20
This product has a minimum order quantity of (2 minimum) This is the minimum order quantity available when purchasing this product.
Contact supplier for technical support on: 704 588 1091
$43.97 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity(2 minimum)
Typically Ships in: 1 day
Returnable: See conditions
A
4 1/32
B
2 17/32
E
3 1/2
G
1/2
H
3 1/16
J
1 15/32
k
17/32
L
1 3/16
O
5/8
P
2 17/32
Q
1 15/32
R
2
S
55/64
Unit Number
UCT 207-20UCT 207-20
W
5 3/32
Wide inner race bearing
Yes
Wide slot
Yes
Take up units with set screw lock.
- Standard duty
- Wide slot
- Wide inner race bearing
- B-type seals
Unit Number: UCT 207-20UCT 207-20
| O | G | P | Q | S | B | k | E | A | W | J | L | R | H | Bi | N | M |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5/8 | 1/2 | 2 17/32 | 1 15/32 | 55/64 | 2 17/32 | 17/32 | 3 1/2 | 4 1/32 | 5 3/32 | 1 15/32 | 1 3/16 | 2 | 3 1/16 | 1.6890 | 0.6890 | 1.0000 |
Dimensions are in Inches.
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read more