We never sell your data to third parties
IPTCI UCT211-32 Take-Up Unit Set Screw mounted ball bearing unit with 2" bore. Wide slot take-up frame for conveyor belt tensioning. Standard lip seal. Cast iron housing with wide inner race insert. Suitable for conveyor and chain drive tensioning applications.
MODEL UCT 211 32
Contact supplier for technical support on: 704 588 1091
$93.23 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
A
5 3/4
B
3 3/4
E
5 1/8
G
3/4
H
4 3/16
J
2 17/32
k
1 1/16
L
1 1/2
O
1
P
4 1/32
Q
2 17/32
R
2 9/16
S
1 3/8
Unit Number
UCT 211-32UCT 211-32
W
6 23/32
Wide inner race bearing
Yes
Wide slot
Yes
Take up units with set screw lock.
- Standard duty
- Wide slot
- Wide inner race bearing
- Available with high temp. bearing, see HUCT
- B-type seals
- L3-type seals available in some sizes
Unit Number: UCT 211-32UCT 211-32
| O | G | P | Q | S | B | k | E | A | W | J | L | R | H | Bi | N | M |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 3/4 | 4 1/32 | 2 17/32 | 1 3/8 | 3 3/4 | 1 1/16 | 5 1/8 | 5 3/4 | 6 23/32 | 2 17/32 | 1 1/2 | 2 9/16 | 4 3/16 | 2.1890 | 0.8740 | 1.3150 |
Dimensions are in Inches.
SKU: 1152690
Itpci bearings
IPTCI bearings seem to perform well for us, as we have had no returns for failure. Prices are reasonable and service is prompt.
Read moreSKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Toshiba |
| Model | VFAS1-4200KPC-H1 |
SKU: 1152690
Itpci bearings
IPTCI bearings seem to perform well for us, as we have had no returns for failure. Prices are reasonable and service is prompt.
Read moreSKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read more